MY TOSHIBA 65HX83 remote will not operate the TV

tv is drawing too much current and protection circuit kicks on and shuts tv down. try turning all screen controls all the way down. if that doesnt fix it, sounds like bad green picture tube. suggest local service center

defective green picture tube crt. suggest local service center

Lol?Anywho it could be that.What it is though is far from sticky.Buttons have pressure "receptors" on them that pick up pressure.Otherwise the wires might have been frayed or come undone in the remote control.In that case contact a proffesional or buy a new remote.Hope it helped

check your settings within the tv. try resetting tv options to factory defaults. if this does not work then remove batteries from tv remote or any remote programmed to operate this tv to see if the remote is sending a commmand to the the tv to power on in error. Buttons on remote get stuck sometimes although you can still press on the power key.

I was able to find the MSN TV Set Up Guide Manual online. Within it was the list of codes for various brands of TVs. One of those for Toshiba TV was in bold print. I used the instructions for entering the code and used that bold printed code. The remote worked both the Toshiba TV and the MSN TV2 unit after that code was entered. Apparently the remote had lost the original code somehow.

simply look up the codes or contact your cable company for the toshiba tv codes to input into the cable remote. you may also be able to operate the cable box via the TV remote if the correct codes from the tv owners manual are entered.

How do you know when your light bulb has burned out? I have sound with a black screen

Definitely, there is some keypad failure. There is a continuous contact anyone of the key. Since key is contiunuosly giving command to the processor Remote function is automatically cutoff. My simle Tips to find out key failure. Good key give "Tick" sound when you press the key softly. The sound is very very low, you have to observe carefully. Otherwise blindly change all the front panel key. Cost is very very low. When the keypad problem is solved, remote will function automatically.

try unplugging the tv and allow the tv to remain unplugged for a least 5 minutes. This will force a reset on the tv which should resolve your remote issues.