Paper in printer - paper out light not illuminated but no print

Dear
Pl. select the paper size ( as mentioned on the paper packet) on computer on click START-PRINTER AND FAXES(new window opened)-(right click on printer icon) PRINTING PREFERENCE(new window opened)-select PAPER -paper option (here the paper size to be selected- APPLY. This may set the paper size default.
Thanks.

Welcome to Fixya

Half circle symbol means printer is in ready state. The printer control panel is comprised of six lights and two buttons. The lights produce patterns that identify the printer status.

1 Jam light: Indicates that there is a jam in the printer.
2 Toner light: When the print cartridge is low, the Toner light illuminates. When the print cartridge is out of the printer,
the Toner light blinks.
3 Paper out light: Indicates that the printer is out of paper.
4 Attention light: Indicates that the print-cartridge door is open or other errors exist.
5 Ready light: Indicates that the printer is ready to print.
6 Go button and light: Initiates action or indicates status.
7 Cancel button: To cancel the print job that is currently printing, press the Cancel button.

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Reset the product

1. If the Power light is on, press the Power button ( ) to turn the product off, and then continue with the steps. If the Power light is off, go straight to step b.
2. Unplug the power cord from the wall outlet.
3. Plug the power cord back into the wall outlet.
4. Press the Power button ( ) to turn the product on.
5. If any lights are still blinking, service the product.

If the print-cartridge status light stops blinking after you reset the product, follow these steps to make sure the driver settings are correct, and then try printing again.

1. Open the printer driver.
   • Windows 2000 : Click Start , point to Settings , and then click Printers .
   • Windows XP : Click Start , click Control Panel , and then click Printers and Faxes .
   • Windows Vista : In the Windows taskbar, click the Windows icon ( ), click Control Panel , click Hardware & Sounds , and then click Printers .
2. Right-click the icon for the product, and then click Printing Preferences .
3. Click the Paper/Quality tab.
4. In the Paper size: drop-down menu, click the appropriate paper size.
5. In the Paper type: drop-down menu, click the appropriate paper type.
6. Click OK to close the dialog box.
7. On the product, press the Resume button ( ) to continue printing.

Also Try using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English)

Loading paper and original documents
1. Make sure:
• You use paper designed for inkjet printers.
• If you are using photo, glossy, or heavyweight matte paper, you load it with the glossy or printable side facing you. (If you are not sure which side is the printable side, see the instructions that came with the paper.)
• The paper is not used or damaged.
• If you are using specialty paper, you follow the instructions that came with it.
• You do not force paper into the printer.

2. Before loading paper the first time, slide the paper guides out toward the edges of the paper support.
3. Load the paper vertically in the center of the paper support, and adjust the paper guides to rest against the edges of the paper.


Align the print cartridges
In Windows

1. Load plain paper.
   
2. Then do one of the following:
   - in Windows Vista, click .
   - in Windows XP and earlier, click Start.
   
3. Click All Programs or Programs, and then select the printer program folder from the list.
   
4. From the printer folder, click Maintenance - Align Cartridges.
   
5. Click Print.
   
6. Follow the instructions on the computer screen to finish.

To clean the print cartridge nozzles:
In Windows

1. Load plain paper.
   
2. Do one of the following:
   - in Windows Vista, click .
   - un Windows XP and earlier, click Start.
   
3. Click All Programs or Programs, and then select the printer program folder from the list.
   
4. From the printer folder, click Maintenance - Clean Cartridges.
   
5. Click Print. A page prints, forcing ink through the print cartridge nozzles to clean them.
   
6. Print the document again to verify that the print quality has improved.

Canon Bubble Jet orange light flashes

on note pad or word you should select the paper size first because it might set to a different size. when you click file click print click properties or printing preference and choose what size of paper you have in your tray and then click ok. print ok.
check the printer paper tray setting to make sure the paper tray side guide is right agains the paper. I hope this will solve your problem.

HH

Hi. The reasons listed in the manual that cause the LED to flash normally are:

Front cover is open
Close the front cover of the printer.
Back cover is open
Close the back cover of the printer.
Paper jam
Clear the paper jam. See Paper jams and how to clear them on page 6-5.
If the printer does not start printing, press the Go button.
No paper fed manual feed slot
Put the paper in the manual feed slot. See Printing on plain paper, bond paper
or transparencies from the manual feed slot on page 1-10 or Printing on thick
paper, labels and envelopes from the manual feed slot on page 1-13.
Memory full
The printer memory is full and the printer cannot print full pages of a
document. See Solving print problems on page 6-15.
Print overrun
A print overrun occurred and the printer cannot print full pages of a document.
See Solving print problems on page 6-15.
Drum Error
The corona wire needs to be cleaned. See Cleaning the corona wire on page 5-14.

If you check out page 6-5 it tells how to clear the paper jam from the rear of the machine! A point often missed.

Check out the website below if you don’t have a copy of the instruction manual =

http://welcome.solutions.brother.com/BSC/public/files/dlf/doc002089/US_Eur.pdf

If all else fails, try a reset of the printer Drum & Page counter:

1. With printer tuned on.
2. Press and hold the “internal button” behind front cover, until all LEDs illuminate.
3. Make sure Drum light is off, then release and close front cover.

Hope some of this helps………..Please post a response back here and let us all know if it works?............Regards, Cornwellnet (UK)

If you are getting a 'carriage jam' error as soon as you turn on your Epson printer with no tasks in progress, then check for any piece of paper stuck in the carriage. Remove the paper carefully. If the paper tears, part of it might remain inside the paper path and damage the product.

Fix 'Carriage Jam' : Open Door, clear carriage jam,
and then press OK to continue' error message
Turn off the printer and open it to see where the paper is stuck.
Manually move the carriage toward the opposite side.
Check the paper path and remove any piece of paper or any other object that is stuck in the path.
Reconnect the power cord and turn on the printer.
http://www.fixya.com/support/t5192341-epson_photo_1400_paper_feed_ink

It means that the printer is in READY State.

Control panel
The printer control panel is comprised of six lights and two buttons. The lights produce patterns that
identify the printer status.
1 Jam light: Indicates that there is a jam in the printer.
2 Toner light: When the print cartridge is low, the Toner light illuminates. When the print cartridge is out of the printer,
the Toner light blinks.
3 Paper out light: Indicates that the printer is out of paper.
4 Attention light: Indicates that the print-cartridge door is open or other errors exist.
5 Ready light: Indicates that the printer is ready to print.
6 Go button and light: Initiates action or indicates status.
7 Cancel button: To cancel the print job that is currently printing, press the Cancel button.

My e-mail is [email protected] could mail You technical document that might help.
Jouni