The lens won't retract

That looks like a software error. Check that the battery is fully charged and read the manual at troubleshooting section. if you don't have one, seach on web and you`ll find it.

There is a problem in the lens assembly circuit. Most probably the connector problem. If there is a snap then it requires replacement of the lens assembly.

error code is associated with the lens port... usually when the pressure against the lens when turning on

hi alexandra olympus cameras are know for having a few lens problems when ever a blue screen comes on the camera is faulty it sounds to me like you have some dirt or dust in the lens i have seen this problem a few times hope u get it sorted goodluck

lens could be off track.. needs repair

Contact Olympus support
This may ge a generic failure and the camera will be replaced.
Anyway they are the folk who know.

my camera is doing the same thing brotha
hmmmmm
im trying to pull out the lens when it turns on but
it just goes back in

same **** here.
D:
3402
8282
5f08
8282
de02

I just posted this answer on an old Dec. 07 posting.

In case you can't find it, try opening the DC IN / USB port cover just to the right of the dial. This breaks the waterproof seal and allows the camera to open. I think the design flaw is an inadequate volume differential in the water sealed cavity to properly account for the change in volume caused by the lens opening / retracting. The USB cover can be closed once the lens is open to restore the waterproof characteristics.

No solution you can make- The motor mechanism is shot Depending on how long you have had the camera you may get it replaced or a repair price quoted. The repair price will be horrific buy the next camera.