- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Fault to its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Ur LCD inverter board is dead.Replaced this LCD inverter board u will get ur picture back.This a simple repair take ur tv aparts,take out the LCD inverter board,it a long shape of a board.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish LCD inverter board for the replament.U will get ur picture back.Ok,good luck,labors about an hour work.
Ur LCD inverter board is dead.Replaced this LCD inverter board,u will get ur picture back.Tries Shopjimmy.com,Ebay.com to buy a Refrbish LCD inverter boaed.
Hello, it sounds like you need to replace your LIPS board (power/inverter board), if you would like to know price and availability please email [email protected] with the request, please make sure you include the model#, serial#, and TW#, all located on the back of the unit.
Hello, please email me at [email protected] or [email protected] for price and availability on the main board. Include the model#, serial#, and TW#, all located on the back of the unit. If we don't have the main board we will find one for you and let you know where you can purchase one.
Your mainboard is damaged, the mainboard is the one where you plug all the cables (component HDMI), it is really easy to replace, you only need to take special care with the screws. 1. remove all screws in the back. 2. unplugg all cables from mainboard. 3. remove all srews from mainboard and replace it. 4. put all screws back and then plug all cables again. 5. double check all mainboard cables are properly secured. 6. Test TV. 7. put the back cover and secure it with the screws.
×