At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Sorry here is the numbers that you wanted serial number is CS351658 and the model number is CS350168 hopefully this will help.. thank you it was to see if we can run our one just on cold water fill only
Hi, Yes you can run this appliance on just cold water using a Y piece... Just connect the 2 hoses together on the Y piece and connect to the cold water!!.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Only Whirlpool would know. What do you want to Decode?
Made in the USA by Whirlpool under licence to Maytag with the Maytag badge on it. The serial number is a just a consecutive number, yours is the 8,560th one to be made.
Hi Adrian, no this number is not a model number for a Whirlpool Washer. If you have a top loading Washer, you can locate the model/serial number by looking just under the lid around the tubs rim. If you have a front loading Washer, the model/serial number can be found by opening the door and looking around the opening of the Washer. The model number will begin with letters, usually with the letter W. We hope this helps.
We are very sorry to hear this and we apologize for the inconvenience this has caused you. We would be glad to look into this if you could email us at [email protected] with your name, address, phone number and the model & serial numbers of the Dryer.
Hi, Consumer. We're sorry to hear about the difficulty with your appliance. Below are links to our Use & Care guides, Parts Diagrams, Troubleshooting information and the Service are of our website. We hope this helps! http://bit.ly/112Lu7q
It depends on the model number. Whirlpool started building 25 cu.ft over ten years ago and the model is still being produced. Please find the serial and number printed on the refrigerator service tag and give us the complete model number along with serial number. The model number will tell us the initial date of production, the serial number tells us the date of production of the specific unit. Here whirlpool date codes explained. To find the service tag check in locations illustrated below.
If this is a Whirlpool manufactured TOP LOADER (such as the one you posted this question under), the model number and serial number are located on a nameplate along the wash tub rim under the lid.
If this is a FRONT LOADER, the model number and serial number will be located along the door facing as you open the door.
If you have questions, please post back and let me know. I hope this helps you.
The part you need is actually the following as it was made for Whirlpool by AMERICAN WATERHEATERS:
Part for AMERICAN WATERHEATERS, Model # E2F80HD045V
Number:
4710185
Category:
Plumbing and Heating
Length:
53.90
Width:
1.10
Height:
1.00
It is sold by Sears and is available for $17.99.
Good luck with your repair!
That depends, I've discovered through experience with replacing those "rps" , the fault actually was in the control. It was displaying an F50, but the rps was fine.
Make sure your model & serial number don't fall under the recent rework issued by whirlpool,(give me the serial & model and I have a list I can check) if so the control will be replaced free of charge to you. Otherwise price out a new control. Sorry I can't provide part number or price right now, I'm on my iphone and not at home pc.
Hope that helps.
Good Luck
that as help me loads thanks
×