Question about Vizio L32 32 in. LCD HDTV

1 Answer

Only vizio light come on then nothing. have to unplug to turn off

Tried to turn tv off,cannot turn power off to tv from remote or at tv.no volume control or channel contol.no channel,volume,or any other button either on tv or remote.unplug tv plug back in. power turns tv on with either remote or at tv unit,but no picture and still no function control from tv unit or remote. still no picture only vizio lite comes on then nothing.have to unplug to turn power off.
tv-vizio vw32l hdtv10a

Posted by on

  • 5 more comments 
  • gramps03 Dec 31, 2008

    I have the same issue with my Vizio 32" tv. I bumped the front corner of the cabinet against a piece of furniture and now it isn't working.

  • Anonymous Dec 31, 2008

    lamp blew. if you look through the vent ports you should see a glow. If you don't then you blew the lamp. Actually when you bumped it it got a surge almost like a light bulb would do when you bump it or drop it. when you turn the set on the power supply sends a signal for the lamp to come on. Since the lamp is not functioning everything stops at the lamp turn on sequence and freezes up. that is why you can't turn the set off by the remote or the power button on the tv. almost like a computer when it freezes up, have to disconnect the power from the source. the Vizio is replacing my set because they told me that when that happens it will do damage to the panel too, so instead of replacing or fixing the part and having trouble down the line they rather replace my tv.

  • Anonymous Jan 21, 2009

    I am an inexperienced tv repairerer. What exactly is the ic and where could i find it and the signal diode

  • Federico Dec 31, 2013

    have a VIZIO E601i A3 a technician came to get some numbers of the back panel of the tv and he rip the power button of the side of the tv I was wondering if I could replace the whole unit because there is some rip cords attach to it ?

  • Anonymous Mar 24, 2014

    the tv acts as if it is locked up like your computer would be. Its frozen. the tv is only 8 months old and it started doing this about 5 months ago

  • Anonymous Mar 27, 2014

    would not turn off until unplugged. control lights come on when turned on but no picture. will not turn off with same power button that turned on with

  • Abctay.com
    Abctay.com May 05, 2017

    https://www.Abctay.com is an online shop ,
    We sell television and electrical accessories,all kinds of TV power supply board, logic board, TV LED screen,
    TV LCD screen, mobile phone screen, as well as various types of electronic tools,tv parts power supply,LCD,ccfl ,
    LED,OLED,lcd panels,HMI,Inverter,LCD screen,lg screen,display screen,lcd monitor,lg lcd, lg monitor ,flat screen ,
    touch screen,hmi,bulb,samsung, innolux ,Mitsubishi,philips, hitachi,auo,innolux,Planar, toshiba, siemens,chi mei,Weinview,
    Infineon,industrial LCD,industrial control, sharp monitor,vigor plc,delta, mitsubishi lcd,omron plc,etc

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

There a problem on power side.. chage the ic and the resistor going to ic and check also the signal diode.

Posted on Jan 03, 2009

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 3 Answers

SOURCE: only vizio light on

why should i tell you (fixYa) how i fixed the problem for free? You wanted to charge me for your info so i think it's only fair that i charge you for mines. I did figure out and solved the problem.

Posted on Dec 31, 2008

solver gariz

  • 88 Answers

SOURCE: tv screen went blank

sound like the inverter circuit board problem. check & replace back same part# inverter circuit board. hopefully could help!!

Posted on May 17, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need the tv code for samsung ph t4254 to program my bell remote to my tv


Hi,

The codes for Samsung TVs on a Bell remote are:

505, 506, 516, 523, 526, 566,

573, 612, 627, 647, 652, 653,

654, 655, 656, 658, 659, 664,

665, 667, 669, 670, 679, 680,
704, 717, 730, 738

Try each of the above codes in turn until you find the one which works best, i.e. controls most functions. This may be limited to contolling the power, volume and channel functions. I have also pasted the programming instructions for your remote below, in case you need them.

Regards,
BElectric.


Program your remote control to operate your TV

NOTE: Before you start, locate the remote codes for the TV and write them down.
Follow these steps to program your remote control to work with your TV:

  1. Press and hold the TV button on the remote until the SAT, VCR and AUX buttons light up.
  2. Let go of the TV button. It should start to flash.
  3. While the TV button is flashing, enter one of the 3-digit codes for the TV that you wrote down earlier.
  4. After entering the 3-digit code, press the # button on the remote. If the code was entered successfully, the TV light will flash 3 times.
  5. Try to control the TV's volume and power.
  6. If the remote did not control the TV, simply repeat steps 1 to 5 with another code from the list.
If you tried all the codes provided for the manufacturer, try the following steps to find another code.
  1. Make sure the TV is on.
  2. Press and hold the TV button on the remote until the SAT, TV and VCR buttons light up.
  3. Let go of the TV button. The TV button should start to flash.
  4. Press the Power button on the remote control. The TV button will stay lit.
  5. Press the up arrow on the remote every second until the TV turns off.
  6. When the TV turns off, press the # button on the remote to lock the code. If the scan was successful, the TV light will flash 3 times.
Your remote should now be programmed to work with your TV.

Nov 23, 2010 | Televison & Video

1 Answer

My tv is block and i dont know wat to do. how can i unblock it?


Don't use the remote control the signal it block.Go to ur manual contol on the tv right side.Push the power button to turn tv on.Push button Menu now U in the tv Menu,Use the volume + or - button move the Menu function to OPTION,now use the Channel + or - go down to the word said Operation lock out(ON) Now push manual contol button said INPUT.Now the word said Operation lock out(OFF).Now remote control is relase,u can use the remote control now.Tell me this work ok.This is how i unlock the Sharp Aquos tv.

May 09, 2010 | Hisense TL1700 17 in. LCD Television

1 Answer

I'm looking for the manual for a Mitsubishi VCR HSU447 with the remote control RM75502 so I can program my TV to it. Thanks


1.- Turn off your TV
2.- On the remote control, set the VCR/TV slide switch to TV position.
3.- While holding in SP/EP button, press the code button listed below that corresponds to the brand of your TV
4.- Press TV POWER on the remote control. Once your TV has turned on, your remote is set up to operate your brand
TV.

Brand of TV Brand Code Button
Mitsubishi 1,2,3
Fisher 0
G.E. VOLUME UP
Goldstar 2,9
Hitachi 8
JVC MUTE
Magnavox 4
NEC 2,9
Panasonic CHANNEL UP, CHANNEL DOWN
Pioneer 6
Philips 4
Proscan VOLUME UP
Quasar CHANNEL DOWN
RCA VOLUME UP
Sanyo 0
Sharp 3,5
Sony VOLUME DOWN
Toshiba 7
Zenith INPUT
I finnaly found my VCR Manual, and I'm glad to share this info with you, because I was looking for the manual all
over the web and FOUND NOTHING!. Bye!

Mar 15, 2009 | Mitsubishi Televison & Video

1 Answer

Sky remote wont control on/off , volume, or terrestrial channels


Press tv on the Sky remote

press and hold select and red until the led blinks twice
type in 0 0 6 0
press the power button, if the tv turns off then the press select and the remote should work all the tv functions.

If the tv does not turn off then press tv then the power button and keep doing this until the tv turns off, once it turns off press select and it should work.

If you have any problems let me know

Dazz

Feb 15, 2009 | Samsung LW20M21C 20 in. LCD Television

2 Answers

Only vizio light on


why should i tell you (fixYa) how i fixed the problem for free? You wanted to charge me for your info so i think it's only fair that i charge you for mines. I did figure out and solved the problem.

Dec 30, 2008 | Vizio L32 32 in. LCD HDTV

2 Answers

Tv screen went blank


sound like the inverter circuit board problem. check & replace back same part# inverter circuit board. hopefully could help!!

Dec 29, 2008 | Vizio L32 32 in. LCD HDTV

1 Answer

BEKO TRW325 TV. Frozen on chanel 1.


I turned the TV off. I held in all of the (4) buttons on the front of the TV and turned the TV back on again....this seemed to free up the remote control access and I was able to work the TV normally. The four buttons were the channel and the volume controls.

Dec 25, 2008 | Beko 324250WN 28" TV

1 Answer

Toshiba 35a44 problem


check the following power supply components
power transistor of the supply
zener diodes
rectifier diodes

Oct 15, 2008 | Toshiba 35A44 35" TV

1 Answer

TV Won't Power Down; Change Channels; Change Volume; etc


sounds like maybe the remote contol is at fault.Do the front panel buttons work?

May 29, 2007 | Panasonic CT-32G9 32" TV

Not finding what you are looking for?
Vizio L32 32 in. LCD HDTV Logo

2,677 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vizio Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76171 Answers

Tony Nguyen
Tony Nguyen

Level 2 Expert

96 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Vizio Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...