Question about Life Fitness Lifestride 9100 HRT Remanufactured

1 Answer

I have A Life fitness 9100 treadmill The display shows the message "maintenance notes wax over" how can I remove this error?the treadmill will not turn on HELPPP

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Life Fitness Master
  • 12,223 Answers

See this steps and fix it. .Of course you must read your instr. manual or download from www. iconservice.com
When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.


  • 2 Press the "ENTER" button three times to access the treadmill's error log.
  • 3 Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.
  • 4 To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.
  • 5 To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted.
  • Posted on Oct 18, 2012

    • 3 more comments 
    • angeloboncod
      angeloboncod Oct 18, 2012

      thanks for the reply I followed the steps but nothing happens the treadmill do not execute commands,the only command that is run when I insert the code 919 but the functions are limited,I find on my display only those buttons (stop, start-enter, clear-pause) (fat burn,cardio,random,hill,random,fit test,manual) tr 9100 hr ser.no 359211 - 9733 -ok26-1904-002-m051-00206d000

    • ernesto cuadra
      ernesto cuadra Oct 18, 2012

      go to www. fitness.manualsonline.com and download your instru.manual, or i am giving my email ercupa@netscape.net for to send you instr , please send me the yours.God bless you

    • angeloboncod
      angeloboncod Oct 18, 2012

      thanks email sent

    • ernesto cuadra
      ernesto cuadra Oct 18, 2012

      o.k .

    • sbirinderos2
      sbirinderos2 Oct 20, 2012

      I HAVE DONE NOTHING BUT THE PROCEDURE

    ×

    Ad

    6 Suggested Answers

    6ya6ya

    6ya staff

    • 2 Answers

    SOURCE:

    Hi there,
    Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

    Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

    Here's a link to this great service

    Good luck!

    Posted on Jan 02, 2017

    Ad
    vpaaf

    Howard

    • 115 Answers

    SOURCE: 9100 life fitness treadmill

    Sounds like you need a new lower board replacement. You can get that for that treadmill by call lifefitness or sportsmith.com Please rate me good

    I’m happy to help further over the phone at https://www.6ya.com/expert/howard_079189dd4959a511

    Posted on May 01, 2009

    Anonymous

    • 83 Answers

    SOURCE: error 1 message on older life fitness t3 treadmill

    Error 1 - Start up error. This is caused because the belt was commanded to move and the opto (speed sensor on the motor) has not seen any movement or the belts movement was interrupted prior to it reaching its commanded speed. To fix Verify opto operation in Diagnostics, Motor Test
    Mode, Section 2. Verify DC voltage at connector P6 pins 1 and 2. Verify that LED 4 on the Motor Controller flashes as the motor moves. Let me know if you need any more help. Fitness Fix-It

    Posted on Mar 24, 2010

    maxtreadmill

    John Mazmanian

    • 832 Answers

    SOURCE: I have a life fitness treadmill and put new wax in

    you will need to go into service menu by pressing and holding the pause button then pressing the clear button twice , continue holding the pause until the service menu appears. then use the arrow up and select maintenance press enter then either use arrow up or down scroll and say refill waxer system or replacing wax bag press enter, this will reset upper console. Upon completion of this the go back into the diagnostic menu select system test press enter scroll up or down to waxer manual mode hit quick start and that will fire up the wax pump and your done

    Posted on Apr 12, 2010

    Anonymous

    • 83 Answers

    SOURCE: FET Error

    FET error is caused by a short in the driver transistor on the motor controller. Unfortunately, the fix for this is to replace the motor controller.

    Posted on May 07, 2010

    Anonymous

    • 83 Answers

    SOURCE: Fet error message

    The FET error message is caused by the driver transistor on the motor controller has shorted out. Unfortunately, the fix is replacing the motor controller.

    Posted on May 07, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    2 Answers

    Lifefitness treadmill belt sticks even though wax bag is fulll


    alot of times you have to remove the wax spray nozel and clean as the wax hardens over it

    Apr 01, 2014 | Life Fitness 91Ti Treadmill

    1 Answer

    How do i refill the wax on my life fitness 9100 treadmill?


    open cover on left at rear of treadmill, disconnect pipe, fill with wax kit and then reconnect pipe, 2 screws to remove wax cover.

    Mar 30, 2013 | Life Fitness 9100 Next Generation...

    1 Answer

    Treadmill says fill with wax


    Diagnostics is entered by holding the 'PAUSE' key when power is applied or by holding the
    'PAUSE' key and pressing the 'CLEAR' key twice from any state.
    The unit will take approx. 3 to 4 seconds to enter Diagnostics.
    On entry to this state, the message:

    USE ARROW KEY TO SCROLL THROUGH LIST till show on ddisplay the option "MAINTENANCE"

    USE ARROW KEY TO SCROLL THROUGH LIST when display show the message "replace wax bag" press enter
    the display show "repair logged" and exit press the key "clear"

    Feb 05, 2013 | Life Fitness 91Ti Treadmill

    1 Answer

    What's your problem?I have a life fitness 9100 hr I have a problem how do I clear the message waxer tank empty?


    see this step and fix it. God bless you
    Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or move on to the next step.

  • 2 Locate the reset switch on the underside of the treadmill console. Usually the button is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.
  • 3 Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.
  • 4 Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.
  • Oct 15, 2012 | Life Fitness 9100 Next Generation...

    1 Answer

    Describe your 9100 Next Generation Remanufactured Treadmill Problem display shows waxer disconected ???


    Dear Sir:

    I will help you inmediately.

    1) Display does not illuminate
    when machine is powered
    on.
    Insufficient power source.
    Plug treadmill into a dedicated amp circuit.

    2) Loose 10 pin connection at
    display console or wax/lift
    control board.
    Check all electrical connections for proper
    attachment.

    3)Damaged main harness wire
    connection.


    4)Replace wire harness.
    Faulty display console or Wax/
    Lift Board.
    Verify if 8VDC is present at P1 pin, 3-4 and
    12VDC at P1 pin 9.
    a)If yes, replace Display Console.

    b) If no, replace Wax/Lift Board. See How To...
    Replace Wax/Lift PCB.

    Use VOM digital (Voltimeter)

    Hoping that you can resolve, if you need some extra help, please reach me.

    blessing.

    E.CUADRA
    MANAGUA, NICARAGUA. C.A.

    Sep 13, 2011 | Life Fitness 9100 Next Generation...

    1 Answer

    9500hr treadmill said "notify maintenance


    Your treadmill is notifying you that some maintenance operation has to be performed.

    Nov 21, 2017 | Life Fitness 9500HR Treadmill Next...

    1 Answer

    I can't reset a fault named "wax empty" and my equipment doesn't work life fitness 9100


    hit the stop button and hold down pouse key until the counsel repowers up and tougle throug to mantinace enter then tagel throug to waxer refill and hit enter

    Aug 13, 2010 | Life Fitness 9100 Next Generation...

    1 Answer

    How do i reset the waxer on a 9100 lifefitness treadmill?


    Press these buttons:
    101–ENTER–
    HILL–RANDOM–
    FIT TEST.

    Program lights come on. Display will scroll toWAX DELAY OFF.

    Press speed "UP" or "DOWN"
    to toggle to
    WAX DELAY ON or OFF.

    May 13, 2010 | Treadmill Doctor LifeFitness 9100...

    1 Answer

    I have a life fitness treadmill and put new wax in the blader how do i start the machine and put wax on the belt?


    you will need to go into service menu by pressing and holding the pause button then pressing the clear button twice , continue holding the pause until the service menu appears. then use the arrow up and select maintenance press enter then either use arrow up or down scroll and say refill waxer system or replacing wax bag press enter, this will reset upper console. Upon completion of this the go back into the diagnostic menu select system test press enter scroll up or down to waxer manual mode hit quick start and that will fire up the wax pump and your done

    Apr 12, 2010 | Life Fitness 9100 Next Generation...

    1 Answer

    Refilled with wax how to reset display


    you have to enter maintenance mode, press (CLEAR) and then press the key (PAUSE) there will appear a message that is doing a checkup, then using the keys you move up to find "Maintenance" and press enter Ahi provided with keys look for the option "WAX REFILL" press "ENTER" and ready and be 100% if you have any additional questions here's my e cardiotech_me@hotmail.com

    Feb 16, 2010 | Life Fitness 9100 Next Generation...

    Not finding what you are looking for?
    Life Fitness Lifestride 9100 HRT Remanufactured Logo

    751 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Life Fitness Exercise & Fitness Experts

    Vincent G
    Vincent G

    Level 3 Expert

    2361 Answers

    Android Man
    Android Man

    Level 2 Expert

    278 Answers

    Kenneth Simmons

    Level 3 Expert

    984 Answers

    Are you a Life Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...