Jvc everio gz mg130 worked fine month and a half, then all of a sudden I get this error message when trying to connect to pc....What's wrong??
USB Device not recognized...computer wonk recognize my
Everio so I can't backup and clear memory....I'm out of memory
"usb not supported" shows on camera while trying to connect to PC.
I had a problem like this -- tried plugging the camera in to the rear USB slots not the front ones and it worked fine.
I think that it doesn't like going via a USB hub, but wants a direct connection. All of the USB ports on my computer are connected direct to the motherboard (i.e. none are on PCI cards or anything), but looking at the hardware info for the computer, it looks like the motherboard has a few "direct" USB connections, and then an on-board hub which the front ports connect to. If your computers are the same, that would explain things. I'd suggest trying each USB port one at a time (turn the camera off before plugging in, and back on when in) and see if one of them works. Wouldn't hurt to power the camera from the mains at the time too.
1,245 views
Usually answered in minutes!
my computer wont recognize my dxg-566v
Same exact problem. I have a GZ-MG330 and it used to work. Now it says "usb device is not supported"
Still haven't got it working :[
Tried different cables, different USB ports, different computers. Always the same.
Sorry, AstroPhil, it didn't work. I tried three different computers (all running XP), and all their different USB ports. I always get the same error.
I was hopeful, though, because your theory would have explained why both of our camcorders do this exact same thing. I'll keep trying more computers, but I have also put in a trouble ticket with JVC. We'll see if I get a response.
-randyhunt198
i download an editing software and now my compuer wont reconize my JVC everio memory camcorder
×