Question about Maytag Atlantis MAV6000 Top Load Washer

1 Answer

MAYTAG ATLANTIS MAV6200AWW WILL NOT COME ON AT ALL.

WASHED CLOTHES ONE DAY, THE NEXT DAY MACHINE WILL NOT COME ON. I HAVE CHECKED FUSE, THE OUTLETS, THE HOSES, AND EVERY THING IS OK. HOW OLD IS THIS MACHINE ANYWAY?

Posted by on

  • kmp1975 Jan 03, 2009

    I did not know there was a fuse inside the machine. How do you get to it? It is expensive to call a repairman for this problem? Does anybody know what the going rate is for a repair?

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have you tried the fuse?

Posted on Jan 03, 2009

  • Richard Smith
    Richard Smith Feb 15, 2011

    I found a ground wire connector broken. replaced the crimp connector to join the two ground wires and put it under the bolt where it was supposed to go and the machine worked. Prior to this it was intermittant due to the ground touching sometimes and sometimes not.

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

6ya.com

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a maytag atlantis washing machine and the white clothes periodically will get stained. I separate my clothes by color and only wash whites with whites. Sometimes, not all the time, a white garment...
Might try cleaning washer with full load of hot water and a product called Afresh

Oct 29, 2010 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Atlantis MAV6000 Top Load Washer: Maytag Top Loading Model MAV6200AWW not spinning w...
Hi,
Here is a tip that will help you with that...

Washing Machine does not Pump or Spin
https://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

heatman101

May 05, 2010 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

I have a Maytag Atlantis MAV6200AWW. The washer
hi
the solenoid on the cold water is gone down or it is not fed with electric

Jan 29, 2018 | Maytag Atlantis MAV6451 Top Load Washer

1 Answer

Maytag atlantis washer mav6200aww will not spin out any more. checked belt and pullies move freely. What next? First load did fine then second load went into spin, started then stopped and did not finish....
IF THE MOTOR NO LONGER RUNS IT MAY BE IN THE LID SWITCH OR POSS. THE TIMER

If you need further help, I’m available over the phone at https://www.6ya.com/expert/dude_653d05454b389bba

Jan 12, 2010 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

My maytag atlantis mav6200aww stops at the rinse cycle. I have to manually move dial to get to rinse and spin.This happens on all cycles. Thanks for any assistance.
Sounds like a bad timer, which is built into the switch. Replace the timer.

Jul 02, 2009 | Maytag Atlantis MAV6451 Top Load Washer

1 Answer

Off balance spin/poor wringing
CHECK TO MAKE SURE ALL THE SUSPENSION SPRINGS ARE CONNECTED INSIDE THE WASHER. IF SO, THERE IS A SNUBBER UNDER THE WASHER MILKSTOOL THAT IS MADE OUT OF PLASTIC THAT CAN WEAR AND NOT ALLOW THE SUSPENSION TO GLIDE LIKE IT IS SUPPOSED TO. NOT THE EASIEST FIX DUE TO THE BRAKE BEING UNDER HEAVY SPRING PRESSURE. USE CAUTION

Jan 25, 2009 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Mav6200AWW Washing Machine
Check whether the power plug of machine is good, connections, fuse, etc. All good, then try below:

Plug off the wall socket. Open up the machine. Remove, reseat and reconnect every connector at least 3 times. Remove the motor control board, spray it down with electronic cleaner along with all connections by disconnecting them, spraying them down. Disconnect and connect a few times to ensure good contact.. This normally works.

Pl give me a ‘very helpful’ rating for the free help, thanks.

Oct 19, 2008 | Maytag Atlantis MAV6451 Top Load Washer

1 Answer

Lint on clothes
hi thanks for the question sometimes a lot of suds in tub will cause this cause lint and suds stick to the outer tub and is difficult to remove try filling the tub with hot water and use vinegar in the water half bottle let stand for 4or 5 hrs . now drain the tub should work thanks for the question the appliance doc

Sep 03, 2008 | Maytag Atlantis MAV6000 Top Load Washer

1 Answer

Black mark on clothes after washed in Maytag top load washer.
Check and make sure the seal at the bottom of the washer is not wore out. Alot of times you will get grease from the bearins and drum assembly if this wears out.

Apr 14, 2008 | Maytag Atlantis MAV6451 Top Load Washer

1 Answer

MAV6200AWW WASHER DEAD.
its not a fuse its a mains capacitor/filter it is located next to your motor if this is faulty machine wont work it will either be a plastic cyclinder/a metal 1 about 4inches long with writing and numbers on it

Nov 08, 2006 | Maytag Atlantis MAV6000 Top Load Washer

Not finding what you are looking for?

View Most Popular

Atlantis MAV6000 Top Load Washer

  • Washing Machines

Related Question

I have a maytag atlantis washing machine and the white clothes periodically will get stained. I separate my clothes by color and only wash whites with whites. Sometimes, not all the time, a white garment...

  • Maytag Atlantis MAV6000 Top Load Washer

Open Questions:

0 Answers

washing machine stops before draining water when I manually put to spin, it is a smell as if something is burning. So something tries to happen, but then stops

Sep 12, 2014 | Maytag Atlantis MAV6000 Top Load Washer

0 Answers

What makes my maytag washer washes thru all the cycles, what is wrong

Jul 07, 2014 | Maytag Atlantis MAV6000 Top Load Washer

0 Answers

I have a Duet tumblefresh 4.0cuft W10284544A. The inlet pump was leaking so I fixed that and now the washer won't co into the spin after the rinse cycle. The washer drains completely after the wash cycle but when the rinse stops the light on the front goes back to wash and it starts beeping and won't stop until you either start the wash or shut off the unit

Jul 01, 2014 | Maytag Atlantis MAV6000 Top Load Washer

0 Answers

I have a Duet tumblefresh 4.0cuft W10284544A. The inlet pump was leaking so I fixed that and now the washer won't co into the spin after the rinse cycle. The washer drains completely after the wash cycle but when the rinse stops the light on the front goes back to wash and it starts beeping and won't stop until you either start the wash or shut off the unit

Jul 01, 2014 | Maytag Atlantis MAV6000 Top Load Washer

See all Maytag Atlantis MAV6000 Top Load Washer Questions

Related Topics

Maytag Atlantis MAV6000 Top Load Washer Logo

Related Topics:

299 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

8 Answers
Washer leaking water from bottom

Maytag Atlantis MAV6000 Top...

28 Answers
Maytag Neptune Error COde "nd"

Maytag Neptune MAH9700 Front...

3 Answers
Want to disengage lid lock on maytag centennial

Maytag Centennial 3.2 cu. ft....

12 Answers
How to replace Maytag Washer belt

Maytag SAV5710 Top Load Washer

7 Answers
Model FAV6800AWW will not pump water out if clothes are in machin

Maytag Neptune FAV6800AW Top...

Top Maytag Washing Machines Experts

jimorris77

Level 3 Expert

411 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Bill Long

Level 3 Expert

606 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...