Hi.
If the lid switch is OK and there is water getting into the machine, then test and replace the pressure switch that detects water level.
Here the part:
SUB 12002304 (Water Level Switch Kit)Part is nr 6 in this diagram.Also test the inlet valve to ensure that dual inlet is working. If hot is not filling, the machine will not complete filling.
A technician can swap valve contacts to find out if
both valves are opening.
If there is no filling at all, check the inlet valve and inlet duct:
Water Inlet Valve.
Inlet valve is at the back of the appliance. It can be tested reading Ohms at terminals.
×