Office Equipment & Supplies Logo

Related Topics:

Posted on Jan 03, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Printer stopped printing in the middle of a doc

I was printing a doc when my printer power lite started flashing and just stopped . now this printer will do this when it is out of ink or paper and display a message of the problem. but this time it just started flashing with no message. i have shut it off and restarted with no result. i have disconnected it , i have rebooted the computer. and so on and i can't figure it out. i am not sure if printer just died or if it is a usb problem the printer is about 3 or molre years old but the computer is just months old like maybe 3 to 4 months

  • rageingwolf Jan 06, 2009

    cartrige is new sorry

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Expert 8,637 Answers
  • Posted on Jan 06, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Jan 02, 2009
Answers
8637
Questions
0
Helped
2740971
Points
514

Have checked the ink cartridge to see if it is empty? Sometime the the inki will run out and not display on the motitor. Have had this happen to one of my friends and that was the problem. Hope this helps. Bud

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Printing on two labels

lets start with the basics.
Do a calibration of the label to the printer : -
1/ Turn off the power
2/Press and hold the feed key
3/ Turn on power and wait for the green feed light to flash twice.
4/ Release the feed key
5/ The printer should feed and print the configuration.
Now press the feed key and the label should feed and stop at the gap.
If this does not work , then let me know via this page.or contact me at the link below

trev

thermal labels printers co uk
0helpful
1answer

Printer stops in middle print job

What model is this printer? If it has a scanner/copier function, try copying something and see if it works that way. If it does, there is an issue with the computer. If it has a problem copying, it is a problem with the printer. Let me know and I can give you additional steps to take.
0helpful
1answer

HP LaserJet 4 Printer stopped printing

Try putting a piece of paper in tray 1
0helpful
1answer

Canon S400 lite binks 6 times won't print.

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal
0helpful
1answer

Power light keeps flashing

Sound like residue from the protective tape that was on the cartridge. Take the cartridge out and clean the copper contacts with a Q-Tip dipped in alcohol. VERY lite-ly... I have seen a lite glaze from the tape stopping proper contact if the were on the store shelf very long....
Please rate this solution if it helps.... Thank You...
0helpful
1answer

Compaq a1500 printing probs

ok you might have tried printing a doc/app out earlier and it might have failed so while you trying to print out this present app/doc the printer still might be focused on that failed or it might be confused. Now to stop this follow these instructions. Go to the start bar click control panel. Then once that window pops up ( control panel ) click printers and other hardware. Then once that window pops up ( printers and other hardware ).  Click Printers and faxes and that page will have all the printers and faxes ever installed to your computer. Now click on the printer thats yours and then a smaller wider window will appear you will that window will have all the doc/app you have ever tried printing out. the status bar will show what is going on with each doc/app. Now you should first stop all the doc/apps and refresh. To do this you should highlight all the doc/app and then go into the document tab ( there are several tabs in this window such as document , printer, view and help) then click cancel and cancel all the doc/apps. last step is to go into the view tab and click refresh and it should work :-). If not contact your printer manufactor.
0helpful
2answers

Send doc to printer and the lights all start flashing and won't pring

use the auto clean function : i.e. press the demo button for about 10 sec. until all lights on the release ---- it will automatically clean internally. You can read the manual -- this is a LSU error.
0helpful
1answer

Printer cartridge container doesn't stop in the middle

It appears that the injection may have been lethal, it was still using the ink that it carries in its tubes then it mixed with the injection and is now blocked \ faulty. To repair it you could try getting a new set of HP inks.
1helpful
1answer

Printer will not print

This worked perfectly for my printer:

Waste Ink Counter Reset

Power off printer and covers closed
Hold down the Resume button then press and hold POWER, the Green Indicator will light. While holding down POWER , release RESUME
Double click (2 clicks) RESUME then release BOTH POWER and RESUME and wait still the printer stops blinking.
When the indicator lights steady, press RESUME three(3) times. The indicator should be ORANGE.
Press Power to set data

I got the solution from the Internet at the following link:
http://www.fixyourownprinter.com/forums/inkjet/15620

Hope this helps.
Not finding what you are looking for?

50 views

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...