The Apple iPad 2 with Wi-Fi and 3G allows you to browse the Internet using a Wi-Fi connection or a cellular connection. You can purchase an iPad with an internal Verizon 3G network card. Verizon has several pay-as-you-go plans to choose from in order to activate their service. Verizon has 1 GB, 3 GB, 5GB and 10GB data plans with no contracts that can be activated within the iPad 2 device.
Slide your finger across the iPad to unlock the device. Enter your passcode if applicable.
Tap "Settings," "Cellular Data," "View Account."
Enter your "First Name," "Last Name" and "Telephone Number."
Enter your email address and password. This creates an account on the Verizon network where you can view your data usage and make changes if applicable.
Tap one of the following plans: "1 GB data per month for $20," "3 GB data per month for $35," "5 GB data per month for $50" and "10 GB data per Month for $80."
Tap the applicable credit card for payment and billing. Credit cards available are the following: "Visa," "MasterCard," "Discover" and "Amex."
Enter your "Credit Card," "Name," "Expiration Date," "Security Code" and "Billing Address." Tap "Next" to continue.
Review the Terms of Service and tap "Agree."
Review Billing and credit card information and tap "Submit." Activation happens immediately and you can begin using your iPad via a cellular connection.
Hope this helps
Power on your iPad.
1.
Remove the lower bolt and lift the caliper assembly up and secure it with a wire or some other retaining method.
2.
Remove the pads.
CAUTION: Do not depress the brake pedal while disassembling the pads
•
The pads for the right and left wheels should be replaced at the same time. Never "drop" or intermix brake pad sets.
•
All four pads must be replaced as a complete set.
•
When replacing the brake pad, check for deformation. When replacing the guide spring, use a new one or the used one after cleaning away foreign material.
2.
Check the pad for damage or deformation.
Brake pad thickness:
Standard value: 9 mm (0.354 in.)
Service limited value: 2 mm (0.0787 in.)
4.
Install the new pads. The shims are attached to each pad as illustrated
Be careful so that the disc or pad isn't contaminated by grease.
5.
Install the bolt and tighten to the specified value.
Tightening torque
Guide rod bolt: 22~32 Nm(220~320 kgf·cm, 16~24 lb·ft)
600 views
Usually answered in minutes!
×