How to bypass magnetic key on gold gym 450 treadmill

Go to the link for help with this problem. https://www.treadmilldoctor.com/treadmill-belt-slipping

I don't think its the magnet. Seem like something else may be going on. You may also have picked up some metal inside the console which then shorted something out inside.

Gold's Gym Treadmill Product Support ' ManualsOnline.com

fitness.manualsonline.com/support/golds-gym/treadmill/

My goldsgym treadmill just goes up and down when t. Gold's Gym ... my treadmill walking belt will not turn. ... Golds gym trainer 480 start button stopped working.

Repair Your Own Treadmill With Mark Peterson - YouTube

? 1:16
https://www.youtube.com/watch?v=B997gX07hW4
May 6, 2008 - Uploaded by Mark Peterson
A certified Fitness Specialist by the cooper clinic in Dallas, and a personal trainer for the first 16 years of my fitness career. .... I purchased a used Golds Gym Treadmill model# GGTL396100 which I tested when buying ... The treadmill will fully incline thennot go down, I have tried to recalibrate the incline ..

This happened to me as well. As wierd as this sounds, Rub/Massage all of your console keys well because believe it or not, they get stuck. While unplugged and without the magnetic key "inserted". Plug the machine back in and "insert" the key. Allow the machine to do the full incline and decline sequence if it decides to do so. Once this happens the machine should allow you to work the console buttons without any issues. At least this is how I was able to fix mine while on the phone with the Gold's Gym technical support. Hope it helps.

do you have the magnetic tag attached to you and the machine? it prevents operation unless its attached.

is it a little round read magnet with a string? try a round magnet of your own and see if that works

you may have a faulty board.Does it have a light on it when you turn it on. If not it is faulty or the power lead is faulty or safety switch is faulty.
If all else fails call a tech to come out and look at it for you.

see the video and fix it. However after you did this and the problem remain, you must test a) control board or b) replace the old board deck belt.

since the key is small magnet you can buy it from any home depot and use by very cheap amount. Try it. otherwise you must go to
www.fitnessrepairparts.com

Do not bypass anything you will damaged the electronic circuit and computer.
God bless you

You can try to get it from the store where you had purchased it or try to search it online.