Dryer function on De Dietrich washer-dryer doesn't work

Most of your questions can be found, and answered, online.

It caused the problem. Appliance repair person

Hi, If you are having problems with your gas dryer not heatingthe most common problem is that the ignitor goes bad. Even though it glowssometimes it is still not working properly. if you dryer is gas check out this gas no heat tip.... If you have an electric dryer, you can have many differentthings that can go wrong causing the dryer not to heat. check outthis electric no heat tip...

heatman101';
'
;

Hi,
The cycling or operating thermostatis often the problem when a dryer runstoo hot, but there are also other things that can make it run hot also.

Here is a tip that I wrote that gives more details about why a clothes dryer will get too hot.

Clothes Dryergetting too hot

heatman101
';
';

Clean the lint filter(s) and verify unobstructed dryer exhaust. 99% of the time the dryer exhaust is clogged.

Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101



treru

Try the valves inside the back where the water hoses connect to the machine they should default to the closed position when water is not required

This is more a workaround than a solution. When you choose the washing programme (say "D") and push the on/off button, two lights will flash, the "door locked" and the "drying" one. Now turn the "drying programme" button until the "drying" light stops flashing (in my case, this is true when I set the drying programme to 40°C). Then start the washing mashine.

Seems like the function of the drying programme button has shifted against the settings written on the button...don't ask me why! Of course, no guarantee but works for me. Please let me know if it does for you.

Filter blocked, disconnect hose from under sink connection and drain into bucket. Hotpoint does not want you to change filter, contact Service Engineer.

I suggest you get all your staff to search tirelessly for an answer, ChrissyJ!