Question about HP PL5060N 50 in. Plasma HDTV

1 Answer

HP PL5060N inputs problems

It switches input by its self like if im on hdmi it will go to antenna

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • HP Master
  • 14,553 Answers

If the set has a input or source button on the outside or side it can be got at and removed (not the plastic button but the switch under it) they do fail in this way and with it removed and the issue gone you can use the remote instead.

Posted on Nov 06, 2012

  • jay Nov 07, 2012

    wow thanks for the fast response i will try doing that thank you so much this really helps im so broke right now . if this doesnt work what else might iit be nd thanks again

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Installing an inside antenna


You can leave the input from the Roku hooked up, hook the antenna to the round connector that says antenna or cable on the tv then select cable or antenna as the input on the TV and select auto scan and let it scan for live chanels and store them...you can switch back and forth between the HDMI input for the Roku and the cable/antenna using the input button on the TV, you won't need to unhook or re hook anything to go from one source to the other.

Mar 16, 2018 | Roku Televison & Video

1 Answer

No video or audio from HDMI inputs, (DirecTV and Xbox), rca aux input or Component input. Over-the-air HDTV from the Antenna is perfect audio & video


HDMI Input Problems - TV Not Showing Image - TV Repair ...

? 2:34
https://www.youtube.com/watch?v=ZtaUPX1tHP0
May 26, 2015 - Uploaded by ShopJimmy.com
Basic troubleshooting and replacement tips for HDMI inputs that are not ... video or audio from your HDMI port, you can take the source video ...

no signal? -hdmi - LG 55LE5400 tv - Forums - CNET

www.cnet.com > Forums > LG

CNETJun 14, 2014 - Sunday my husband hooked up an RCA ANT571 antenna with great results. ... The Roku first showed no signal on the TV. I tried hooking the Roku up to other HDMI ports, i changed the hdmi cables, .... Sound comes through, but not picture. ..... Video; All Video · Apple Byte · Carfection · CNET Top 5 · CNET ...

No sound on LCD TV - Desktop HDMI connection [Solved] - CCM

ccm.net > Forum > Hardware
Oct 11, 2012 - The video is excellent, but there is no sound coming out of my TVspeakers. ..... I also tried inputs besides the "HDMI 1" input and the other RCA ...

HDMI vs Component ' TVBlanket



Feb 03, 2016 | RCA Televison & Video

1 Answer

What do I do when the tv say no signal it just have a blue screen


First you'll need to make sure your TV is on the correct input. By the way, it's likely your TV is ok, unless the input you're using is defective. If you have an external antenna for over the air reception the TV must be on the antenna input and set to Air or Antenna, not cable. If you have basic cable the input must be set to cable. If you have a box for cable or satellite you can use antenna, composite, component or HDMI input. HDMI or component will give you the best picture. At this point just make sure the TV is set to the same input the box is connected to. If you still see the no signal then the Main board is bad.

Feb 21, 2015 | Televison & Video

1 Answer

Lg monitor m2262d


SIgnal is not stable. try new cable. or HDMI

Oct 24, 2013 | Computers & Internet

1 Answer

Tv saying cant find an antenna.ive pluged in hdmi cable between tv and virgin box,but tv saying no antenna found


You have to go into the input menu and select HDMI as you are on the antenna source at the moment,
Look for "input" or "source" button on your remote control and go to HDMI and press "select" "o.k" or "enter" button. Best of luck.

May 06, 2011 | LG Televison & Video

1 Answer

Hello, I am currently having a problem with my Audiosonic KM0767 Standard Definition Set Top Box. When we first bought it we wired up all the plugs and it worked great. We then moved onto Foxtel...


did you switch the TV's incoming signal to digital antenna? For the cable box it was probably set to cable antenna or analog inputs, not all TV's have automatic switching for antenna feeds. My Mitsubishi has 1 digital and 1 analog antenna input and the cable box will only work through the antenna input if it's the analog antenna input and it's tuned to channel 3 or 4, -(or through a seprate HDMI, PROSCAN, SVCR,or a yellow RCA plug input)- and when the analog antenna input is selected the TV will tune all analog cable channels that the cable service offers if a box is not used. likewise the TV will not tune any channels at all if it's set to digital antenna inputs. It will tune all local channels only when set to digital antenna inputs.

Dec 26, 2010 | Televison & Video

1 Answer

Lg 42' lcd cant get video signal i can get sound and menu pictures all come up. but no output from cable or ps3


I guess your either using the scart socket or the HDMI socket. You have gone into the menu and changed your input source to either HDMI or Scart havent you? Does your TV aerial input work when switched to Antenna on the input source menu. If these dont happen then you have a faulty main pcb.

Feb 13, 2010 | LG 42LH40 LCD TV

1 Answer

Vizio 46" hdtv. when turning on the tv, the blue screen come up but the switch in side will on not allow antenna connection to come up. it will go to the av, component, hdmi. but not the tv mode..


Try pressin the channel up/down button instead of the input button. Sometimes this will activate bring up the cable/antenna input...

Good Luck....

Jan 08, 2010 | Televison & Video

1 Answer

Proron pltv-4250 no signal


THE BEST INPUT ON YOUR SET IS THE HDMI INPUT.2ND THE COMPOSITE INPUT. 3RD THE COMPONENT INPUT. AND 4TH THE ANTENNA INPUT. MOST DISH BOXES HAVE AT LEAST THE COMPONENT OUTPUT. YELLOW IS THE VIDEO AND RED AND WHITE FOR AUDIO. USE RCA CABLES TO GO FROM BOX TO LCD SET. ON THE DISH BOX YOU CAN GO FROM ANTENNA OUT TO THE CABLE OR ANTENNA IN ON THE LCD. SWITCH TV TO CHANNEL 3. AND TURN YOUR DISH BOX ON.

Nov 22, 2008 | Protron PLTV-4250 42 in. LCD Television

Not finding what you are looking for?
HP PL5060N 50 in. Plasma HDTV Logo

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Edward Easley
Edward Easley

Level 2 Expert

97 Answers

Are you a HP Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...