SHARP AR--M207 Error L4-11

Use SIM 03-11 to check the shifter motor operations. Check connection of the harness/connector of the shifter motor. Replace the shifter motor. Replace the MCU PWB.

Hi Alafin,

An error code of L4 suggests a motor error. It could be something as simple as a loose cable but it could be a bad motor. I would suggest you call on a local dealer to repair this as you will probably need new parts.

anon, WINDOW XP driver for SHARP AR-M207
Sharp Electronics AR M207 Free Driver Download Official
Sharp Ar M207 Driver Download
SHARP AR M207 EB
http://www.driverslib.com/Multifunctional/Sharp/AR-M207.html

Enter simulation mode by pushing # * C * then type 14 and the copy button. The machine will restart and the error code will be gone.

U2 04 EEPROM serial communication error
11 Counter check sum error
12 Adjustment value check sum error (EEPROM)
40 CRUM communication error

this the U2 Code Error

scanner return trouble

heat roller low temperture detection&check the thermistor abnormality,heatlamp abnormality,thermostat abnormality,clean the paerdust guide &use sim 5-02
check the heater lamp blinking operation
use sim 14 to clear the slf diagnostic display

all action bloked code: L6-10
please healp me

# - intrrup key - clear - interrup key 14 print
this all

check fuser lamp, thermost



just

SHARP AR250 H5-01 Papersensordefective in the fusing unit

Normally you can clean the build up of toner off the sensor, and it'll sort itself out. It also could happen by having 5 paperjams in a row.

You might need to run a service mode to reset the machine:

P * C * 14 (start) then 1 for Yes and follow on screen directions, code should clear out.