How to change tax rate on Casio MS120TV

Non-printing models (also applies to HR-8TE printing calculator):

1. Press [AC]
2. Hold [SET/%] key for about 2 seconds
3. Press [TAX+]
4. Input the tax rate
5. Press [SET/%]


Printing models (except HR-8TE):

1. Have calculator in "print" mode
2. Press [CA]
3. Hold [SET/%] key for about 3 seconds
4. Input the tax rate
5. Press [TAX+]
6. Press [SET/%]

I have a j-120 Casio, and the following worked on that:

Press and hold the 'rate set%' button (next to "Tax-" button).

The currently held rate will display.

Type in 17.5, then hold down the 'rate set' button again.

Voila!

1. Press the "AC" button.

2. Punch in the tax rate you want. (ex: For 17.5% vat type 17.5)

3. Press the "RATE" button. (RATE flashes in the display.)

4. Press "TAX+"

That's it.

This works on several different casio calculators
Press AC butoon
Press AND HOLD % /Rate Set button for 2 to 3 seconds - This is important
Press Tax+ button
Input the tax rate you want eg: 12½% = 12.5
Press the % /Rate set button again

Voila

How do I program tax rate into my calculator?


Non-printing models (also applies to HR-8TE printing calculator):

1. Press [AC]
2. Hold [SET/%] key for about 2 seconds
3. Press [TAX+]
4. Input the tax rate
5. Press [SET/%]

To change the VAT rate:-

1) Press the [CA] button

2) Hold the [SET/%] button for about three seconds until the display reads 0.

3) Type 15 for the new rate of VAT

4) Press [TAX+} button

5) Press the [CA} button

To check the new rate you have press [CA] and [TAX+] to show the current rate, the [VAT-] is linked to the [VAT+] button and doesn't need changing.

Hope this helps

Hi.
Has it had the system options set for tax? Was it calculating previously? Usually you just need to change the rate when you have a tax increase.

Mark

How do I program tax rate into my calculator? Non-printing models (also applies to HR-8TE printing calculator):

1. Press [AC]
2. Hold [SET/%] key for about 2 seconds
3. Press [TAX+]
4. Input the tax rate
5. Press [SET/%]

How do I program tax rate into my calculator?
Non-printing models (also applies to HR-8TE printing calculator):

1. Press [AC]
2. Hold [SET/%] key for about 2 seconds
3. Press [TAX+]
4. Input the tax rate
5. Press [SET/%]

You don't need too, by setting the + it does the - at the same rate