Tv stuck on standby

My baird JO47 tv is stuck on standby - Digital TV - Streaming ...

www.tomsguide.com/forum/55998-4-baird-jo47-stuck-standby

Dec 17, 2012 - 4 posts - ‎2 authors
My Baird JO47 tv is stuck on standby and won't come off. ... I have a panasonic 50" TV it will not turn on no green light or standby red light ... Forum; my tv standby light keeps flashing blue on and off and won't switch on Forum ...

Baird JO47 Stuck on Standby ' Electronics Forum (Circuits ...

No. i think you have a power problem the switching power supply of your tv is damaged. But you can try to reset it if you know how.

Its either an issue with the main or power board.

Repair kit Now available on Ebay.. BUY NOW
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200884727409


If you have any one of these LG Models TV below, and all of a sudden, the screen lights for only a few seconds, then goes into standby with a clicking noise. [Stuck in standby] When you try to switch it on, it tries but then just clicks and goes back to standby? In this video, I show you the components that goes bad, and the culprit that causes it all. The power supply board has already been bought from Ebay, but I'm still selling the voltage regulator that is dang near impossible to find on ebay, as well as the REPAIR KIT for this power Supply Board. Board model number EAY60968801. With any one of these PCB # EAX61392501/7, EAX61392501/10, EAX61392501/11, or EAX61392501/12 Please Make sure that you've already gone through the process of troubleshooting and testing your tv's power supply board before making any purchases.. I recommend that you get a tv tech to check it out, because every tv is different. Remember, the component, and the repair kit will only repair power supply model (EAY60968801) with the appropriate PCB numbers. You buy at your own risk

most LG have a "vacation switch" on the bottom right hand side of the set very near that standby light.

it is placed poorly, where you can accidently click when grabbing the TV to move it or swivel it.

it is a toggle switch, a "master power" switch.

you may have bumped it to the off position. flip the switch, your standby light will come back on.

Unplug,replug the tv an hour later,let the tv reset itself,might work again.

called customer service at polaroid. they said the problem was within the tv itself.

Did you get your tv fixed? It may be the Sub power supply unit. If the main supply went out it would not light the display at all. Yes it is time for th repair shop. Good Luck.