Forgot password everfocus mod. ecor264

Thhe Factory Default is.
For user type in : admin in lower case .
for Password Type in : 11111111 .
thats 8 # 1 .

Go into the camera settings and lower the brightness. if that doesent work you have to adjust the Iris on the camerss.

Here's the manual. Read it. http://www2.everfocus.com/downloads/manuals/ECOR_manual.pdf

On some DVR's you can reset the password by downloading .bin files from the manufactures website onto a thumb drive. I've done it for other models just not Everfocus. It's pretty simple if you can get access to those files. After you have them on the thumb drive you power down the device, plug in the thumb drive, the device scans the thumb drive and resets your password back to default, hope that helps!

You can use restore to take the computer back to a date that you know that it worked. You can use right click and open with to set the program, you can reinstall everfocus. You can manually set the file associations.

default password is 11111111

My sea gate 500 GB portable hard disk not detecting on computer

Default User and Password on Everfocus is usually
Admin
Admin

Nevertheless, you should contact your local distributor, and after providing the product serial number, they can generate a reset user and password, that shall be used only once, and then, you must enter a new user/password combo.

There are two methods to reset. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the Device from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand devices are given. Never forget to exit the service mode, after all adjustments have been done.

You can reset the password. If you have another computer and a USB flash drive - see http://www.rmprepusb.com/tutorials/12---bootable-usb-drive-to-reset-windows-user-pasword