Panasonic stereo is a regular table top with cd, cassette, radio with an auxillary mode. It worked fine when we had the westinghouse as the 1st tv and ran direct through the dish satellite box to the panasonic stereo.
SOURCE: can't progam my direct tv remote to operate my westinghouse 32''tv
I don't have DTV anymore, so I don't remember the exact code I used for my SK-32H240S, However, I do remember that I found one that worked at this site. Scroll down to locate your remote series # - it most likely will be printed on the upper left corner of the front of the remote - as an example, mine says RC64. Click on the corresponding listing, then follow the directions on the site. I tried only a few codes before finding one that worked correctly. Good luck.
SOURCE: I have a westinghouse tv model number SK-32H240S no picture
It seems that your unit has some sort of Video side, PSU fault, or a problem to the Video section that is shutting down the Power Supply Unit, PSU. This happens so that no further damage, and possible fire will occur.
You need to take the unit to a reputable service centre/man and ask for a firm "Quote" for the work to be done.
SOURCE: Westinghouse tv Mod.SK-32H240S COMES ON SHOWS THE
Having the same problem and wondering if this solution worked :D
31 views
Usually answered in minutes!
I guess the full question didn't post....when I connect the audio cable I get nothing on the auxillary setting through the stereo....the speakers still work on with the cd and radio. I wondered if there is something else I need to run the audio cable through before going to the stereo?
×