I have a digitech RP 90 effects pedal but recently one of the foot switches just stopped working. It doesn't move the LED number on the screen when I press it but the other one works fine. Does anyone know how to fix this?
I removed the back cover, unscrewed the two (of 4) screws holding down the circuit board, replaced them again, and it worked fine.
Check out the little switch under the foot switch. It's a little button type switch that the big lever you hit with your foot is activating. make sure it's being contacted correctly. Also check the solder joints on the PCB directly below the switch. Good Luck.
This should be a simple fix. The tactile switches are available from Digitech or any online parts supplier. As previously stated, check the switch first with a multimeter. You can also try cleaning the switches. Take tweezers or pliers and lift the small piece of metal from the top of the switch and spray some contact cleaner to the inside of the switch. This sometimes fixes the switches. If you are gigging with the pedal, get a new switch to be safe.
4,767 views
Usually answered in minutes!
Exactly the same thing, everything, the right foot switch isn't changing the presets I have, so I can't even access the tuner.
I have the exact same problem with the left foot switch :/
same problem with the right foot swicht, when i wanna change a preset to an upper number number i have to go throw the other way with the left
my right foot swicht doesnt work too
×