SOURCE: i need to add 2
Contact Bulova for additional links, 800-233-3350. You will need the watch model number and the case number (it's in the back beginning with "C".
SOURCE: link removal from band
if you don't have the necessary tools or knowledge then your best bet is to take it in and have a professional remove the link(s) for you. It all depends but sometimes if you take it to Macy's or Neiman's they will do it for free.
SOURCE: how do I take out links to size my bulova tfx
You have to press the pin out of the side of the ban. I use a tool they sell at harbor freight tools to do it. If you dont have a harbor freight near you they have an online store. You can also use a good push pin and a small hammer to tap the pin out. Put the ban on it's side over a small hole drilled i a flat piece of wood so the pin can come out without bending. do this for each link you want out then tap the pin back in on the last link to put it back togather. Sometimes there is an arrow on the inside of the ban showing you the direction to drive the pin out
SOURCE: I need to add links to my caravelle Bulova watch
You will likely need to go to a jeweler that carries Bulova or Citizen (now owned by the same company) as most after market parts are only available to retailers. Also, you may want to check for a used or broken one on EBAY or somewhere, then you can replace the links inexpensively.
Testimonial: "Thank you!"
SOURCE: tighten watch
On this type of watch, you would normally remove sections of the bracelet to tighten it although there is sometimes scope for small adjustment in the clasp itself. This is a fiddly job, and my best advice to you would be to take the watch to your local watch repair/watchmakers/jewellers shop and get them to do it for you - it shouldn't cost you much and hopefully they'd do a professional job.
103 views
Usually answered in minutes!
×