Time set How to reset the time on Quemex gents sport watch

Can be as simple as a Battery (dirty contacts). If not, have the watch cleaned and serviced accordingly.

Hi jerryurq51,

Please follow these steps to set the time of your Armitron Digital Sport #40/8125BLK Watch.

1. Press the MODE button once. This will put you in the timer.

2. Press and hold down the MODE button. This will put you in the alarm set display.

3. Press the MODE button once more and it will put you in the time set display.

4. Use the ST/SP button to change the blinking portion of the time. Then use RESET button to move you thru the different parts of the time/date.

Hope it helps.

Thank you for using FixYa.

http://world.casio.com/wat/download/en/manual/

There are so many applications use of the manual will be mandatory.

Use the four numbers on the back of your watch and you will have a PDF version of your instruction manual.

Hope this tip helps

R/

David

http://antiqueclock.clockstop.com/

you can find a mannual exper cheap wow gold

How to set the time on a bench digital watch Bench BC0013BR

Hi Cheese,

Please use the link below which has the information to reset the time

http://ftp.casio.co.jp/pub/world_manual/wat/en/qw5057.pdf

http://www.ronda-startech.com/chrono/main.php?x=functions

If the watch has a Rhonda movement go to the above link for instructions.

For setting Time & Date...
1. Push "MODE" button three times (change Mode to TimeSet)
Time -> StopWatch -> AlarmTimeSet -> TimeSet -> Time ->...
2. Flashing Second Number Digits
3. Push "RESET" to select...
Second -> Minute -> Hour(12hr<->24hr) ->...
Date -> Month -> Day of Week -> Second -> ....(repeat)
4. Use "START" to set each item...

For setting Alarm ON/OFF
1. Push "RESET" button then Push "START" same time...
Alarm ON -> Alarm OFF -> ... (repeat)

Press mode til you get to time then press and hold set. Once the hour starts blinking press the ST/SP button to set the time, then press set again for the minutes and do the same thing again. This should let you set your watch.

OK YOU GO TO SET TIME BY PULLING OUT PIN TO SECOND CLICK OUT. THEN USE THE BOTTOM BUTTON TO SET THE ALARM DIAL TO THE SAME TIME AS THE MAIN WATCH HANDS. CLICK BACK IN ONE CLICK WINDER THEN USE THE BOTTOM BUTTON TO SET THE ALARM. CLICK WINDER BACK IN FULLY AND PRESTO YYOU HAVE IT.