Not able to connect to router. default address not working for initial set up
QUICK TIP: When finding a location for your range extender, it is best to place it within the same room as the computer.
You can also use https://192.168.206.1 to access the range extender's web-based setup page.
Step 1:
Place the range extender in an area where the Wi-Fi signal of your router is strong, but near where you want to establish your extended network.
Step 2:
Plug in the power supply of the range extender and make sure that it is powered ON. Shortly, its light will begin to flash blue and orange.
Step 3:
Place your computer near the range extender. Also, make sure your computer is not wired to any other network devices.
Step 4:
Connect your computer to the range extender by opening the list of Wi-Fi networks and selecting Belkin.setup. Confirm that the list shows it's connected.
Step 5:
Open a web browser, enter https://belkin.range into the Address bar, and follow the on-screen instructions. Don't forget to type "http".
Once the setup for your range extender is complete, you may connect the computer to its Wi-Fi.
king of necro
Posted by Anonymous on Dec 13, 2012
buy a calendar?
×
SOURCE: Opening the NAT connection for Xbox 360 working through 2 routers
Hope this helps!
SOURCE: How do I access my Belkin N Router's settings?
open internet explorer and type 192.168.2.1 and the will get u to the belkin router page and then click on mac address control and then type ur password to get in to the router and it will take u to all the mac address u have allowed or denyed
SOURCE: Wireless connection keeps dropping after about a day.
I had the same problem (see Jan 09) but I found the solution:
I had trouble with the router resetting from time to time, that was fixed by upgrading to firmware 1.05. But I still had the wireless problem.
For me, disabling 'UPnP' (advanced->advanced network) and disabling turbo G mode (setup->wireless setting) did the trick.
Work great since then, both my laptop and my media center stays connected, going on one month now.
Hope it can helps other.
SOURCE: Belkin Wireless N router/Embarq 660 modem/No internet
THE PROBLEM IS THAT THE BELKIN RTR AND THE 660 HAVE THE SAME IP ADDRESS THE QUICKEST FIX IS TO RENAME THE LAN IP ADDRESS OF THE BELKIN RTR
SOURCE: Belkin F5D8233 keeps dropping connection
change your wireless mode to either 802.11g or 802.11.n, do not use 802.11b&802.11g&802.11n option.
1,340 views
Usually answered in minutes!
×