Question about Televison & Video

1 Answer

My LG television f801 fuse has blown what voltage fuse is it?

LG Television fuse

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 8,617 Answers

The ratings will be stammped on the board next to the fuse if it doesnt say then its a 125V fuse amperage will be stamped on the fuse itself if not stamped on the circuit board next to the fuse.

Posted on Dec 14, 2012

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

SOURCE: LCD LG RZ-20LA70 20 stopped working

Same problem with our LG LCD. Just thrown away, never a LG again.

Posted on Mar 04, 2008

William

  • 188 Answers

SOURCE: No Power to Television

LG gives 2 years warranty.

Posted on Dec 09, 2009

leethedeuce

Lee A.

  • 4472 Answers

SOURCE: manual 37LH3010 LCD TELEVISION

http://www.lge.com/uk/support/product/support-product-profile.jsp?customerModelCode=37LH3010.BEU&initialTab=documents&targetPage=support-product-profile#
Click link above to download the manual.
Thank you,
Lee

Posted on Dec 12, 2009

Anonymous

  • 1 Answer

SOURCE: My Philips 47" LCD television acts as though the fuse has blown.

Philips agreed to a buy back.

Posted on Dec 20, 2009

Anonymous

  • 1 Answer

SOURCE: my television LG 26lx1d doesn't turn on. I heard a

Mine did the same thing. It just seems dead, and ot lights at all. I tried another good cord, but nothing. Did you find the answer?

Posted on Mar 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes a blown fuse in tv samsung


Usually in a Cathode Ray Tube Television a blown fuse is either something is wrong in the high voltage power supply section or the flyback transformer is bad, or a bad horozontil output transistor.

Nov 18, 2013 | Panasonic CT-36G34 36" TV

1 Answer

F801 television fuse has blown


If its bad replace it with the correct fuse and or check for a short on either side of the blown one first---this at the power cord or where?

Dec 14, 2012 | Televison & Video

2 Answers

Heard a pop noise from LG 60PC1D tv, tv shut off and now the picture looks like a negative kind of...what is wrong?


Capacitor on the power supply popped and it is not allowing the proper voltage to be reached to the main board. This is messing up your picture. I would repair it before you create more damage from the blown capacitor on the power supply.


Please rate if this helped :)

Mar 08, 2011 | LG 60PC1D 60 in. Plasma Television

1 Answer

I have a LG MU-42PZ90V that was given to me. I found one bad fuse. When you turn the power on it flickers from orange to green then shuts off. I was just checking a few things and noticed that it has...


Hi:

On this model you must replace the power supply if the blown fuse was on the power supply, but the main cause for LG failure is the Y_Substain Board assembly. When measureing the voltage of the Large Capacitors, this is the primary side to the main supply, you must measure the caps form hot ground, on the AC side of the Standby transformer for correct Voltage, 66V is to low. Look at the side of the Lrg Capacitors for their voltage ratings, the Supply voltage to these should be some what near this voltage but never higher. The Y_Substain board is to the left of the power supply standing in back of the unit. Its possible its just the Y_Board gone bad, but in my experience the you should replace them both.

Dec 03, 2009 | LG MU-42PZ90V 42 in. Plasma Television

1 Answer

I have a 42" lg plamsa tv the screen went black and still had sound.. found a blown fuse on the board to the right of the power board, when i replaced the fuse,it will power up and then 5 seconds later i...


The fuse you have replaced would have been on the sustain board, now that it clicks indicates a problem either with the control board or the sustain board. You would need to disconnect the connector from the power board to the Y-sustain board (left of power board) to check if the Vs & Va voltages are present, if so then the power supply will be working ok & the problem will be with the previously mention boards. There is the possibility that the plasma display screen could also be faulty.

Nov 06, 2009 | LG RU-42PX10 42 in. HD-Ready Plasma...

1 Answer

Picture gone on an LG 42pc1dv-ec plasma. Sound OK, inputs OK. Vs fuse blown on y-sus board. Replaced fuse but still no pic. Checked d.c voltages from PSU. When switched on from cold Vs>300 and Va>80....


Your Vs voltage is high, check if the heatsinks on the Z-sustain board are getting hot after a short time, if so replace the Z-sustain board. If not, dis-connect the Vs & Va plug connection to the Y-sustain & check if the voltages are normal (185V & 80V). If they are then your fault will be in the Y-sustain board. There is a possibility the control board (sits below the power supply) could also be a problem as it is not able to initiate the control to the sustain boards.

Oct 11, 2009 | LG 42PC3D 42 in. Plasma Television

1 Answer

Plasma television with sound and no picture


You will most likely have a fault with the Y or Z- Sustain board. It might be one of the fuses has blown on the board. You would need to check this & check if you are getting your Vs & Va voltage supplies to these boards. There are other possibilities, it may be advisible to call your service repair centre.

Sep 24, 2009 | LG DU-42PX12XC 42 in. Plasma HDTV

1 Answer

Tech tips toshiba burns fuse


If F801 blew off then check standby power supply section and if F860 blew off on pressing power button then check inverter transistor (power out) on power supply board.

Sep 17, 2009 | Toshiba 42H81 42" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

744 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Cindy Wells

Level 3 Expert

6065 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...