Gigabyte P4 Titan GA-8IDX Rev:1.0 - Intel Gigabyte GA-8IDX 845 AGPset P4 Skt478 ATX Motherboard, Bulk Package (MBGA8IDX)

If you go to CPU-Upgrade.com, you can see all of the different processors that are compatible with your motherboard:

http://www.cpu-upgrade.com/mb-Gigabyte/GA-8IDX.html

The ones highlighted in pink are not supported for your motherboard, the ones highlighted in orange may or may not be, and all the ones in white are compatible with your motherboard. It looks like you have several high-end options, up to 2.8 GHz.

You can download the drivers from Gigabyte WEB support site,select your model motherboard to download :-http://www.gigabyte.com/support-downloads/support-downloads.aspx

You can download the motherboarddrivers and BIOS updates from Intel WEB site. Select your model motherboard/device, and makesure you select the Windows XP or Vista version of the drivers that matchesyour Windows operating system. Please click on this link andselect your model motherboard : -http://downloadcenter.intel.com/default.aspx?iid=gg_support-au+home_downloadctr

If google and manufacturer website are of no help then ask a search agency like http://manualfox.com/driver.htm
- They do a great job.
The service is not for free, but often worthy (you only pay if they find what you are asking for).

yes

Your motherboard can take 3Gb of RAM (1x3Gb sticks) at PC133
http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ProductID=1349 this is the official page for your board.

Well in the bios set up you`ll have SATA Emulation Options. You can set Emulate Sata As IDE

Hello amanoj65,

I'm not sure that 845 is the right identification for that motherboard, but Gigabyte has a terrific site for downloading HERE. You will need to answer a few questions about the motherboard but I'm sure you'll find what your looking for.


Good Luck and don't forget to leave a rating.

Mark

Hi

From the following locations you can obtain the NIC driver for your motheroard.

http://america.giga-byte.com/FileList/Driver/desktop_driver_lan_intel_100_noap.exe

http://tinyurl.com/cvbayp
Try driver files from these locations and revert back if any help needed.

Warm Regards,
Zulfir Sadat M

Try this.
Open case somewhere on motherboard will be (reset BIOS) or word to that effect. it will be a small 2 pin connector with a jumper on 1 pin connect the jumper across both pins for 30 seconds remove jumper fit back over 1 pin (not get lost) reboot your BIOS should have reset to default hope this helps post comment if does please