Has good water flow at door,no water to icemaker.icemaker switch is on,we have no book.evidently solenoid valve is either getting no signal/or not working?what problem is most likely?Claude
This also happened after I changed the water filter. The small black rubber tube that fills the tray was plugged with ice. Instead of hot wash cloths I used a hair drier for a couple of minutes.
This just happened to us and the icemaker tube (black tube coming from the roof of the freezer) was frozen. We changed a water filter and apparently did not run enough water through the new filter, the black tube that puts water into the white ice tray had ice coming out of it. Additionally, there was one frozen cube in the first slot of the tray. We heated wash cloths and placed on the tubing until the ice melted. We did the same for the tray and the water began filling again. Hope this helps.
Solution #2 was the same for us. the black tube delivering water to the ice tray was frozen. we use wash clothes wet with hot water to unfreeze the tube and now it works great! Good luck.
The prime suspect would be the solenoid valve. Check it for continuity with an ohmeter (after unplugging the fridge and disconnecting the coil, of course). If that's okay, then you might have a bad switch in the icemaker itself, or the supply line might be frozen. I'm betting on the solenoid. Good luck with the fix!
874 views
Usually answered in minutes!
Our Kitchen aid superba ice maker isn't working either, yet there is water flow to the dispenser on the door HELP!
My ice maker is not making ice and the red light is blinking on the off off switch. I don't have an owners manuel and was wondering what to do?
I have the same problem with the ice maker suddenly not working but there is flow to the water dispensor.
Must be a sudden epidemic, anyone try the rec. solution with success??
×