Question about Xerox WorkCentre 7425 7428 7435 7525 7525 Waste Toner 008R13061

1 Answer

Xerox 7435 Display frozen/stuck/not responding

I keep having the same problem return, the display gets stuck and does not respond to touch, after messing with it and restarting it will eventually begin working again. Any ideas?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Xerox wc 7425 err code 10-338

Posted on Mar 09, 2016

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The Home and Back buttons don't work on my Alcatel one touch pop c9, what could be the problem?


I was searching for this model, and found out that it have capacitive touch, meaning that there is no physical buttons.
There could be only 2 things, if you haven't mess around with trying to root the phone.
1. Hardware: Under the capacitive touch, there is a digitizer, which respond to the touch of the screen or display, if the is damage, then the home, back and menu buttons will stop responding.
2. Firmware: Sometimes the firmware gets corrupt, and the device needs to be flash with a fresh firmware.

Aug 26, 2015 | Alcatel Cell Phones

1 Answer

Touch Screen wont work?


Return it haha. Its broken. If its not working after restarting it or after hitting it a few times or something then its broke

May 03, 2013 | T-Mobile Concord

1 Answer

Microwave Model 40180089700 shows "5E"


You have an error code and probably for good reason. maybe a switch is bad to keep out radiation for closing the door or what ever . If you don't know about these things don't mess with them! They are very dangerous and it can radiate you with out you knowing in some instances. Not worth messing with ,too dangerous for the unknown guy!!!!!

Jan 12, 2011 | Kenmore Microwave Ovens

1 Answer

I just bought a brand new Toshiba laptop. It hasn't even been a week yet , and i keep getting warnings saying there is a problem with your cooling fan. please turn it off immediately and return for...


the best thing to do is to return it while it is under warranty, it will only get worse and eventually mess up the processor

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/charles_c2f37a3461344482

Dec 15, 2010 | Computers & Internet

1 Answer

I have a 2001 ford f150, cd is stuck display keeps saying bad disk/cd error, display keeps showing that message even when off. it keeps draining the battery especially when cold, I've put in a new...


You need to remove the stuck CD...place another (old) CD under the stuck CD...keep tgrying to insert...will eventually kick out the stuck CD...be sure to clean with Disc cleaner to reduce chance of happening again...:)

Dec 13, 2010 | Ford F-150 Cars & Trucks

1 Answer

My touch screen keeps messing up, certain letters dont work.


I recommend you backup your favorites.

Then attempt a hard reset.

Finally, replace the firmware and system software using webupdate.
Replacing the system software will most likely correct the malfunctioning keying of letters.

I hope that helps.

Apr 03, 2010 | Garmin nuvi 205 GPS Receiver

1 Answer

Garmin nuvi 205, sometimes it won't respond to my touch. Sometimes when I go to give it a name or address it just keeps repeating a letter, "aaaa, or jjjj. then when I touch the botton to go back or clear...


Your touch display is shorting out....BAD
Replace Unit
BUT try this first:
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} To recalibrate the touchscreen on your nuvi 200 series follow the steps below:
  1. Have the unit turned OFF and unplugged from power.
  2. Slide the power switch to the ON position and hold for about 45 seconds.
  3. A message will display on the screen: Press Dot.
  4. Once this message displays, release the Power button.
  5. Press in the center of the Dot.
  6. Keep pressing in the center of the Dot as it moves around the screen.
  7. Once this is complete, there will be a message: Calibration Complete.
  8. Touch Ok and the unit will restart.
The touchscreen will now be recalibrated.
*Note if unit is running software version 6.00 or newer you will want to follow steps from below.
To recalibrate the touchscreen on your nuvi 205 series follow the steps below:
  1. Have the unit turned OFF and unplugged from power.
  2. Place your finger in the top left hand corner of the touch screen and apply pressure.
  3. Slide the power switch to the ON position.
  4. Hold pressure in left corner until the Press dot message appears.
  5. Once this message displays, remove your finger from the screen.
  6. Press in the center of the Dot.
  7. Keep pressing in the center of the Dot as it moves around the screen.
  8. Once this is complete, there will be a message: Calibration Complete.
  9. Touch Ok and the unit will restart.
The touchscreen will now be recalibrated.

Does this help? Let me know. Thank you...

Nov 03, 2009 | Garmin nuvi 205 GPS Receiver

1 Answer

The screen on my Garmin Nuvi 200W won't respond. I tried the recalibration but the screen doesn't respond when I touch the dot. I also tried a hard reset and that didn't help either. Help please!


There is more than one calibration procedure, but for the 200 it is:
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} To recalibrate the touchscreen on your nuvi 200 follow the steps below:
  1. Have the unit turned OFF and unplugged from power.
  2. Slide the power switch to the ON position and hold for about 45 seconds.
  3. A message will display on the screen: Press Dot.
  4. Once this message displays, release the Power button.
  5. Press in the center of the Dot.
  6. Keep pressing in the center of the Dot as it moves around the screen.
  7. Once this is complete, there will be a message: Calibration Complete.
  8. Touch Ok and the unit will restart.
The touchscreen will now be recalibrated.
*Note if unit is running software version 6.00 or newer you will want to follow steps from below.
To recalibrate the touchscreen on your nuvi 205 series follow the steps below:
  1. Have the unit turned OFF and unplugged from power.
  2. Place your finger in the top left hand corner of the touch screen and apply pressure.
  3. Slide the power switch to the ON position.
  4. Hold pressure in left corner until the Press dot message appears.
  5. Once this message displays, remove your finger from the screen.
  6. Press in the center of the Dot.
  7. Keep pressing in the center of the Dot as it moves around the screen.
  8. Once this is complete, there will be a message: Calibration Complete.
  9. Touch Ok and the unit will restart.
The touchscreen will now be recalibrated.

If this doesn't work you have two choices
Buy a new one
Or
Send your in for repair. Go here for this option
http://www8.garmin.com/support/outofwarranty.html

Aug 23, 2009 | Garmin nuvi 200W GPS Receiver

1 Answer

IPaq rx3115 screen unresponsive


Bad screen if the driver was bad they would tell you that you are having a problem with the driver

Feb 07, 2009 | HP iPAQ RX3115 Pocket PC

1 Answer

Troubleshooting IBM ThinkPad A31 monitor problem


The system is having problems with the graphics drivers, heres how to tell!!! when you first turn the machine on display is clear until it gets to windows. To resolve the problem is quite easy, just reboot into safe mode and un-install the graphics drivers, then reboot. When the system restarts is should re-install the graphics drivers automaticaly for you, job done :)

keep me informed please

regards

Nov 24, 2008 | Computers & Internet

Not finding what you are looking for?
Xerox WorkCentre 7425 7428 7435 7525 7525 Waste Toner 008R13061 Logo

Related Topics:

409 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

CheckitRight
CheckitRight

Level 3 Expert

1363 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...