50PFP5332D/37 50 inch plasm has no HDMI Input

I have a 50pfp5332d/37 Phillips Plasma. It was working fine I wanted to plug my pc into the HDMI input to watch youtube videos on the TV and I ripped the two HDMI input connection off the back of the SSB Board. OK The old SSB board with the HDMI tore off inputs was 3104 313 61731 The NEW SSB board I installed into the TV is a 3104 313 61734 The TV Opion Codes set for 02064 00292 00549 02691 01109 00000 21152 00000 (This code had to be changed after installation of the new board because the new board was set to spanish and must have been from a diffent set? What I am asking is The Cable into the TV works fine. I dont have another piece of equipment to plug into AV In One and AV In Two to verify if they work. I plug my pc into the HDMI cable and it is NOT RECOGNIZED. I plug the pc into the small TV right next to this one and it is recognized on the computer and the screen pops up on the small tv within a minute or so. The 50pfp I get nothing, The only thing seems NOT to be working is the dag nabbad HDMI Connections and that is all I wanted to work in the first place. Can someone Cross Reference the Boards to make sure this one will work in the tv? Please tell me it should work or will not work and that is the issue or I have a BAD BOARD that I just installed into the Television. Did I miss something? Is there another setting I need to look at for the HDMI in the setup configuration for the board? Any help as fast as possible will be greatly appreciated because I really want to put the back on this TV and wrap it up so I can get this little house cleaned for Christmas. This TV is simply too large for the size of the home and I can not even move around here until it is back together