I have 3 Hunter 5 blade, flush mounted ceiling fans with two light bulb light fixture operated with a programmed remote control through each bedrooms original light switch.
In two of the three ceiling fans, a light bulb burned out and now the remote will not work to turn on the fan or lights. We can turn the light on with the pull chain but when clicking on the remote to operate the fan, all we hear is a click and the fan will not operate.
I've replaced the battery in the remote but this did not help.
Any ideas?
Mike
how to replace light switch in emerson ceiling fan. It is stuck on the on position for the lights.how to replace light switch in emerson ceiling fan. It is stuck on the on position for the lights.
AnonymousMar 18, 2014
remote quit operating fan and light-changed battery in remote and all is well for a few days-battery went dead-changed battery and everything is fine for another few days now second battery is dead what are my options?remote quit operating fan and light-changed battery in remote and all is well for a few days-battery went dead-changed battery and everything is fine for another few days now second battery is dead what are my options?
AnonymousMar 22, 2014
The remote quit working. I turned off the electricity, it would not reset. The remote does not work at all. The light works on the pull chain, the fan does not, no speeds. Can I bypass the remote?The remote quit working. I turned off the electricity, it would not reset. The remote does not work at all. The light works on the pull chain, the fan does not, no speeds. Can I bypass the remote?
AnonymousMar 23, 2014
Remote works fine for the light, I have no control over the fanRemote works fine for the light, I have no control over the fan
AnonymousMar 25, 2014
We installed everything ok then later light won't shut off with remote so used pull cord light went out turned off fan with remote now nothing worksWe installed everything ok then later light won't shut off with remote so used pull cord light went out turned off fan with remote now nothing works
AnonymousMar 27, 2014
fitted by an electrician so I know all is correct. fan was originally in another room and worked fine. moved it to the bedroom and the remote won't do anythingfitted by an electrician so I know all is correct. fan was originally in another room and worked fine. moved it to the bedroom and the remote won't do anything
AnonymousMar 28, 2014
Am changing out the control switch on a hunter 3 speed ceiling fan. What is the color code.Am changing out the control switch on a hunter 3 speed ceiling fan. What is the color code.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure the light wire is connected to the receiver & bottom of fan.You should set the light to the on position when using the remote and leave it that way.
Need more control? We have many universal remotes and wall control options for yourfan and light ... Customize your lighting. Add a new light kit or change the lighting hardware on your fan. Complete light kits. Need lighting parts? Glass and ...Complete Light Fixtures - Controls - Glass/shades
Hi Does the light fixture have a globe under the fan? What does the light fixture look like? Most of the light fixtures have small screw surrounding the globe that simply unscrew and the globe drops down. All fans are different and I will have to know what this one looks like. In the mean time I will look at some hunter fans on line and see what I find.
Connect the lamp output wire of the receiver to the hot wire of the fixture, and the incoming hot wire to the hot input of the receiver. Be sure to insulate the fan output wire(s) so nothing nasty happens if someone presses the fan on button.
Check the remote control manual to see if you can use compact fluorescent bulbs. You probably cannot if this is a dimming lamp control; most CF bulbs flicker wildly if used with dimmers, and will not last long.
Look on the side of the Fan above the light fixture there is a little black switch you just need to switch it, make sure the fan is off before switching it.
how to replace light switch in emerson ceiling fan. It is stuck on the on position for the lights.
remote quit operating fan and light-changed battery in remote and all is well for a few days-battery went dead-changed battery and everything is fine for another few days now second battery is dead what are my options?
The remote quit working. I turned off the electricity, it would not reset. The remote does not work at all. The light works on the pull chain, the fan does not, no speeds. Can I bypass the remote?
Remote works fine for the light, I have no control over the fan
We installed everything ok then later light won't shut off with remote so used pull cord light went out turned off fan with remote now nothing works
fitted by an electrician so I know all is correct. fan was originally in another room and worked fine. moved it to the bedroom and the remote won't do anything
Am changing out the control switch on a hunter 3 speed ceiling fan. What is the color code.
×