Question about Worldtech Devices World Tech 85618 2CH Silverlit Gyrotor X-Rotor RC Helicopter

1 Answer

World Tech Saturn-X - spins, rudder trim doesn't help

I've set everything up according to the directions, rechecked and I think I did everything right. The blades fire up and the copter just spins to the left. directions say push the right rudder trim until it stabilizes, but no matter how many times I push it or for how long I hold the trim button, it just keeps spinning to the left. This is with the throttle on just enough to spin both blades, no more.. Any help would be great, thanks!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I know what the problem is, i had the same issue right out of the box. if you take the cover off the front you will find the battery. on the bottom of the battery is a 2-sided sticky tape to hold it in place, on that tape the is probably a pulled wire. theres red blue black and white (as well as a thicker red and black that lead to the battery. find the wire that is pulled and solder it to the correct part. for me it was the white cable which controlled the top blades. the helicopter spins because both set of blades should counter rotate and if one of the motors isnt getting power from pulled cable the helicopter will spin and flip. Hope this helped. email me at thedew312@gmail.com if you need more help finding where the wires connect

Posted on Jul 30, 2014

Ad

2 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

wetere

  • 1 Answer

SOURCE: can't get my copter to stop spinning no matter how

Looks like you're not the only one with this problem. Four of us have bought one and we're all having the same problem.
Think we've been ripped off.

Posted on Jan 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After installing windows 7 my cd drive doesn't work. I've tried new drivers and disabling it and everything else I can think of... can anyone help?


Hello,

Are you sure that you have installed the correct driver? Try going to the website of your computer's manufacturer and get the driver from there.

David

Mar 26, 2013 | Dell Inspiron 1525 Notebook

1 Answer

How to correct trimming problems did what the insteuctions said and keep having the same spinning counterclockwise problem


Just bought the air hogs helicopter with the crane. Had the aircraft constantly spinning clockwise, no matter how much I turned the trim control counter clockwise the aircraft still rotated. I then turned the trim control in the opposite direction until I noticed the aircraft had stopped spinning, and used the rudder control to fine tune forward flight. So, get the aircraft to hover and turn the trim button in the opposite direction until you see that the aircraft spinning slows right down. If you continue to turn the trim control in the same direction the aircraft will increase its spin, so just dial back the trim.

Dec 29, 2012 | Air Hogs Havoc Heli Helicopters

1 Answer

I can't get my bobbin thread to pull up on my brother bc-1000 sewing machine


have you tried changing the needle?
if you have & it doesn't help then it's possible that the machine is out of time & needs to be serviced

May 16, 2012 | Brother BC-1000 Computerized Sewing...

1 Answer

2001 dodge stratus Radio doesn't work bass & trebble lights blink always


you should let it recheck from a electrician, probably one of your wires loose or something burned on the first i could think

Feb 06, 2012 | Cars & Trucks

1 Answer

How do I reset the security theft on a 1990 pontiac bonneville


This link will help you out. Has alot of information on the system.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Dec 22, 2011 | Cadillac DeVille Cars & Trucks

1 Answer

Having trouble programing my extreme 3d pro joystick and FSX deluxe. I am using Vista. I can't get the elevator trim up/down to work. Doesn't even seam to work when i press 7 or 1 on the...


I would first of recommend doing a calibration of your joystick. To do that, make sure your joystick is connected to your computer and go to your start menu>>devices and printers. Once your window pops up, find your joystick and right click on the icon, and go to settings. You can find the calibration wizard there. Once that is done, open up your Flight Simulator X, and go to the settings tab. Along the right hand side, click on controls. From there you can configure your joystick buttons to whichever action you like. Please keep in mind as well when your are adjusting the elevator trim, rudder trim, that the adjustments made from one keystroke, or button push, are very very small adjustments. You can change that by moving the slider on the Repeat column, thereby making one keystroke or button push equal to multiple taps!

Sep 13, 2011 | Microsoft Flight Simulator X

1 Answer

How to trim. It spins out of control. Trim button doesn't appear to help the problem.


could maybe be trimming the wrong direction, as in its so far off the one side that small changes to the trim make no difference

May 27, 2011 | Toys

Not finding what you are looking for?
Worldtech Devices World Tech 85618 2CH Silverlit Gyrotor X-Rotor RC Helicopter Logo

298 people viewed this question

Ask a Question

Usually answered in minutes!

Top Worldtech Devices Toys Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

29699 Answers

ray gallant
ray gallant

Level 3 Expert

65304 Answers

Are you a Worldtech Devices Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...