Installation of printhead

Hi..

Try here
http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf

You can find illustrated instructions on how to remove the old printhead, as well as on how to put the new printhead back in place.

You can easily go to that website by going to:
www.kodak.com/go/printheadsupport

and selecting the second option "installing new printhead".

Good Luck:-)

There is an instructions on how to remove the printhead on this website
www.kodak.com/go/printheadsupport
Thanks

kodak offers free replacement of printheads,if u have new printhead, log on to www.kodak.com/go/printheadsupport and u can see how to install new printhead. call kodak 1800 421 6699 for further issues

Hi, Here's a link to view step by step instructions. If this helps you plz rate this 'fixya'. If you need more help leave a comment & I'll be happy to help you further. Thank you kindly.

http://www.kodak.com/global/en/service/products/ekn033540.jhtml?pq-path=9104#

(click on the 5th question on the page)

Its hard to find but there is a black release button above the bullseye, press up on it and the
printhead will release, take out same way was put in.

You can email tech support for instructions or call the toll free number below. These are the instructions for my KODAK 5100 from Kodak tech support.

Thank you for contacting Kodak technical support. If you should have any questions regarding the replacement of the printhead for your KODAK All-in-One Printer, support is available at 1.800.421.6699, 7:00 A.M. to midnight, 7 days a week.

Please check the following information how to install it:
a) Follow these instructions for step-by-step guidance on how to remove and replace your printhead.
b) If your printer is not powered on, press ON.
c) Lift the printer access door and wait for the carriage to move to the center position.
d) Remove any paper that may be loaded in the printer.
e) Remove both ink cartridges.
f) Unlatch the used printhead by pressing the button on the left.
g) Lift the used printhead out of the carriage.
h ) Remove the 3 plastic protective shields from the new printhead.
i) Place the printhead into the carriage
j) Push firmly against the back wall of the printehad until you hear a load snap.
k) Intall the new ink cartridges and make sure you hear the click into position.

If you need further assistance, please contact our Kodak technical support available at 1.800.421.6699, 7:00 A.M. to midnight, 7 days a week.

call customer service center click on kodak help icon or look on line for 1800 number they will send you a replacement printhead free of charge 1 to 2 days shipping

when replacing the printhead you will see a number of circles at the back of the print head , you press on this and the print head will snap in place, I found this very difficult initially as you do need to use some force. Actually I phoned Kodak help line and they directed me how to replace the print head on the phone, Kodak appear quite happy to solve problems and if you find it still difficult they will guide you. Apparently these kodak printheads are a common fault and need a regular replacement when the printing loses colour!!

You can download the user manual from Kodak. It will give you the info you need. It is a little trick to get the old printhead out, but it snaps into place at the top, so that is where you need to release the old one.

Hi - You can download the manual from the link below:

Kodak 5300

Please update the question & let us know if the information given was useful to you - Good Luck!