Cant control volume with dish satelite remote

FIRSTLY

• With the desired equipment on, press and release the Mode button until the light flashes behind the correct mode.
• Using the tip of a pen or the eraser on a pencil, press the address button.
• Enter the code (see links to find your code below) on the remote's numbered keypad for the equipment.
• Press the Address button. If the code entered is valid for the remote, the mode light flashes three times.
• To verify the code works, try several functions for that equipment. Some codes may provide partial functions or respond differently than the button's titled function. Try the other codes listed for that device until you find one that offers more complete functionality.