Hobart A200 Stand Mixer Logo

Related Topics:

Posted on Jan 23, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

No power in 1 2 gears 3 runs great

Is there a shear pin for 1,2,gears

Answer This Question

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

  • Master 640 Answers
  • Posted on Feb 12, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Vice President:

An expert whose answer got voted for 100 times.

Joined: Jul 31, 2007
Answers
640
Questions
1
Helped
441001
Points
1475

Yes,but they are key's.I'm a hobart tech is the mixer apart?

  • Ed Hunley
    Ed Hunley Mar 03, 2014

    The only one shearing is on low speed gear. The beveled gear (under low sp. gear) part of the key isn't shearing. I had it apart, put it back together. Didn't see any broken teeth, or worn bushings. I don't know how to check the clutch(roller)bearings, or the metal springs that go with them.

  • Ed Hunley
    Ed Hunley Mar 03, 2014

    I can take it apart if you tell me what to look for. Your help is GREATLY appreciated.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Haden Mixer is 3 years old, motor is working, at different speeds, but is not turning attachments. Any suggestions please?
In the drive train there are shear pins that are soft enough to shear if the gears are strained. It happens on bread dough if you run the machine too fast or put a piece of bone into a grinder attachment.

Or, sometimes a gear will move. if not correctly shimmed.

https://www.google.com/search?q=Haden+Mixer+parts+diagram

..
Read full answer
May 09, 2023 • Food Mixers
0helpful
1answer

KitchenAid Professional 5 Quart stand mixer grain mill won't grind?
From what I know about these and industrial Hobart mixers is that where drive gears are on a shaft they are held by a shear pin that goes right through the gear and the shaft. They are made to shear if the grinder or planetary head is strained. It shears the pin instead of damaging the motor or shredding gears. When they do shear, there is often enough friction to turn the attachment, but not enough force under load. I see two shear pins in this diagram 19/8 and part 14/8. The diagram also show the orientation of bevel gears.

https://www.google.com/search?q=olympus+s924+manual

A Moulinex Coffee Mill might be a better solution for grinding wheat.

..
Read full answer
Apr 16, 2023 • KitchenAid Food Mixers
0helpful
1answer

KitchenAid Artisan mixer accessory port not turning
You probably just need a new Shear Pin. This is just a small steel pin like a nail that goes through the gear and the drive shaft. If the strain on the final drive exceeds specs, the pin shears through and thereby saves damage to the gears and motor.

Google

make model parts diagram

https://www.ereplacementparts.com/kitchenaid-4ksm150psbw0-artisan-tilt-head-stand-mixer-parts-c-114958_114959_115458.html

This is one of the Shear Pins. They just call it 'pin, retaining'.

https://www.ereplacementparts.com/shear-pin-retaining-pin-p-621981.html

..
Read full answer
Jan 07, 2022 • KitchenAid Artisan Series Tilt-Head Stand...
0helpful
2answers

My kitchenaid k5ss mixer malfunctioning after the beater jammed. On an object that fell in the bowl
If the beater isn't turning, it has probably sheared the shear-pin, which is there for that reason to protect the gears and the motor.

Easy repair. Videos below

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk03GFyu6UlFhMWLJpADfDCGo9V2d8g%3A1605405821962&ei=fYywX5qPOrKp5NoPgOGTkA0&q=kitchenaid+k5ss+replace+shear+pins

..
Read full answer
Nov 15, 2020 • KitchenAid Food Mixers
0helpful
2answers

Runs but doesn't turn. Worm gear is not broken.
Something must be broken if the motor is turning and the planetary is not. It will be one of the following, we will start from the first point of contact with the armature
1) Worm gear broken (fuse gear) you say no teeth broken
2) Worm gear not broken but whole unbroken plastic part not gripping aluminium boss
3) Pin through worm gear broken or missing
4) Pin through centre (or bevel) gear broken or missing
5) Pin through small gear in planetary broken or missing
6) Pin through planetary hub centre shaft broken or missing

The most common ones in order of likelihood are, 1, 2, 3 and 6
Read full answer
Dec 29, 2014 • KitchenAid KSM90 Ultra Power Series Stand...
0helpful
1answer

Hobart A200 mixer. 1st gear has no torque, I can stop it by hand. I found the key sheared on the low speed gear(flat gear, beveled gear part wasn't sheared). I replaced the key, & it sheared it again...
Ed, if you continue to do it yourself, the end result will be tossing good money out. Have a professional check the system and save the unit from permanent damage. Chipping parts of a gear off means a serious resistance force or action has occurred. One force is slowing down as the other is speeding up. Gear alignment can be moved off center, or a sudden application (sudden stop or start) can damage the least resistant parts. For example, when a hook turns within the mixing chamber and the resistance of the content is too great on the turning shaft and gears, which ever part is weakest will break. Complicated I guess.
Read full answer
Mar 01, 2014 • Hobart A200 Stand Mixer
0helpful
1answer

Hobart 20QT guessing old a200 motor runs fine removed top cover to see but gears not working and mixer does not spin Any diagnosis Help greatly appreciated
The first vertical shaft has a brass gear that runs off the rotor. The ancient models had a spring loaded slip clutch built onto the gear. Upgrade it with a worm shaft kit which gives you a complete new shaft and fixed gears. I think it includes the upper and lower bearings. Maybe replace the grease if it has not been done. Or look for a sheared key on the worm shaft.
Read full answer
Feb 19, 2014 • Food Mixers
1helpful
1answer

Motor runs, beater stopped rotating. Some gear sounds heard before it stopped. Beater will not turn at any speed setting.
drive gear or shear pin stripped. Common on this model. Return to repair centre. Expect to pay approx $150.00 to repair, sorry.
Read full answer
Sep 14, 2009 • KitchenAid KSM150PS Artisan Series Stand...
0helpful
1answer

Hobart a-200
HI CHECK ALL GEARS FOR A SHEARED KEY. IF IT HAS A ROLLER CLUTCH, COULD BE WORN ROLLER CLUTCH OR SPRINGS MADE OF SPRING STEEL BEHIND EACH ROLLER IN CLUTCH FATIGUED. YOU CAN CAREFULLY RUN MACHINE JOGGING ON OFF SWITCH WITH GEAR CASE COVER OFF AND CHECK GEAR ROTATION FOR SHEARED KEY. IT'S ONE MESSY JOB!!! SOMETIMES NUT ON TOP OF MAIN SHAFT UNDER CAP OUT OF ADJUSTMENT. SHOULD BE APPX. 1/2 TO 1 TURN FROM TIGHTENED. HOPE I GAVE YOU SOME ASSISTANCE, JOE
Read full answer
Aug 11, 2008 • Food Mixers
0helpful
1answer

Slips in all gears
you have no speed 1,2,3 right?first thing to do is drop the planetary (this is the bottom with the beater shaft)undo the bolt and it will drop down.you will see 1 gear,that gear should not spin without the shaft spinning too.if it does you have a sheared key on the gear.if you have access to the transmission check the worm gear attached to the motor it has a roll pin through it make sure its not sheared.then look at the top left gear assembly and check for sheared (broken)keys.clean up all the parts,if you dont you could miss something.let me know.
Read full answer
Aug 22, 2007 • Hobart D300-6036 Mixer
Not finding what you are looking for?

View Most Popular

A200 Stand Mixer

  • Food Mixers

Related Question

Haden Mixer is 3 years old, motor is working, at different speeds, but is not turning attachments. Any suggestions please?

  • Food Mixers

Related Topics

155 views

Ask a Question

Usually answered in minutes!

Popular Questions

How much grease should I pack into a gear box of a...

Hobart D300 Stand Mixer

Need oil/grease for Hobart 20 qt. mixer

Hobart HL200C Mixer

Oil change for hobart h-600 mixer

Hobart H600 Stand Mixer

Trying to find the age of a Hobart Mixer serial number 1569386

Hobart Food Mixers

HOBART A-200 MIXER- FIRST GEAR NOT WORKING

Hobart A200 Stand Mixer

Top Hobart Food Mixers Experts

vince

Level 3 Expert

2530 Answers

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Are you a Hobart Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...