Have changed hdmi leads. Virgin has changed Tivo box3 times. Still has problem.Have changed hdmi leads. Virgin has changed Tivo box3 times. Still has problem.
It's possible there's an issue with your video board on your TV. Can you use component leads to connect to your TV instead?It's possible there's an issue with your video board on your TV. Can you use component leads to connect to your TV instead?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Virgin MediaYou can set-up your Virgin Remote Control to operate the Volume and Mute functions on your TV so you only need one remote to watch TV. Firstly, please select ...Missing: vm202 alcatel
Virgin MediaTo clear your changes and reset your remote to its original settings: Press and hold down and on the remote at the same time until the light on the top of the remote flashes green twice. Press three times, then press. The LED will flash green four times and exit programming mode.Missing: vm202 alcatel
Blue Screens are usually caused by three factors, the first and easiest to detect is a faulty ram, the second and a little more complex failure surface is hard and the third and most complex operating system failures , in the latter you must use the restore disk that came with your computer and reinstall the operating system, only to lose all data on the hdd
Hey, connect a network (straight through cable) from the blue socket on the modem to the WAN socket on your router (This socket will be split away from the other 4 on the router), then turn on your router 1st then modem.
User the video button the remote to cycle through the various display types (4 in all) press the video button once and wait a few seconds - if you just use the yellow to yellow composite connection you should not get any more than one blank screen. Look at the readout on the top right when you get a picture to see what you have selected.
Try changing the channel of the router to 1,9 or 11, and make sure that there is no cordless phone near the router or the wireless computer, this will help mionimize wireless interference. If this may not work you may want to adjust some settings on the advance wireless settings of the router like the beacon(set it to 50) and RTS/fragmentation(2304).
Have changed hdmi leads. Virgin has changed Tivo box3 times. Still has problem.
It's possible there's an issue with your video board on your TV. Can you use component leads to connect to your TV instead?
×