Question about Toshiba 56H80 56" Rear Projection Television

Power light flashing/ no picture

Turned off tv last night 10:30 pm +/-. tried to turn on at 5:30 this am with remote nothing happened, tried power button nothing happened. I then noticed power light was flashing and tried to turn tv off with power button but light kept flashing so I then unplugged tv. When I plugged tv back in it came on but picture was very unstable, like it was tring to change size I unplugged it again but let it sit for a few minutes. When I plugged it back in it worked fine for about 30 minutes then went off and power light started flashing again. I then unplugged for about an hour and tried it again, it came on and had sound but no picture for a few minutes then went off and light started flashing again. HELP PLEASE!

Jim Albritton Aug 01, 2007

That helped once but now it doesn't
sound tries to come on but is intermitant
no piture
Anonymous Mar 14, 2014

TV will not always switch on. Light flashes as if it is trying to switch on but does not. If you switch of and unplug it sometimes will switch on after ten mins.

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.
Contributor
1 Answer

I have the same problem. The only way to get the TV to come on is to unplug it, but once you get it back on it turns itself off again in a few minutes.

Posted on Jul 19, 2007

Graham Haylock May 30, 2018

Have you tried resetting the TV with the TV Volume and Channel +/- buttons.
Graham Haylock May 30, 2018

Just noticed the date so ignore this comment as It's very unlikely you have the TV still.

1 Suggested Answer

6ya staff

2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Posted on Jan 02, 2017

Add Your Answer

Upload

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Last night about 3 am I turned off my tv. when I usewd my remote to turn it back on it would not ( t v) come on and no picture or sound . I turned it around to see the back of it but it has no reset

Your TV have faults on Horizontal deflections, the oscillator and the Flyback might be the problems. If you are not familiar with TV circuits?... call tecnician to check your set.

Oct 03, 2014 | Televison & Video

1 Answer

No power

replace the power supply board inside tv

Jan 30, 2013 | Emerson Televison & Video

1 Answer

Tv will not turn on

Look for any loose contacts in the power cord. Wear protective gloves, shake the power cord when the TV is on, and find out whether it is getting on/off. If not, the problem lies inside, like dry solder and/or leaky/dry capacitors.

Aug 07, 2012 | Insignia IS-LCDTV32 32 in. Television

1 Answer

Had electrical storm last night. Tv shows the Westinghouse symbol, nothing else. This is when it is turned off. When you turn it on (from the tv, remote won't work at all), symbol disappears for 30...

If your TV has a reset switch on the back, use it. If not, Unplug the TV, hold the power button down for 30 seconds, let it go and remain unplugged for another 5 minutes or so.
Plug it back in, and see what happens. Try changing the inputs/channels/etc to see what happens. If you're still having this issue, Take your TV in for repair.

- Sidenote, a $25 power bar with built in protection curcuits are the easiest way to protect your equipment from this kind of thing, and quite a bit cheaper than forking over $300 for a new TV everytime there's thinder and lighting.

May 11, 2011 | Westinghouse 32" Flat Panel LCD HDTV

1 Answer

WD57732 purchased 12/06 and has worked fine. Turned off at 11 pm last night. No indication of trouble. Tried to turn on this morning and nothing. Did TV Reset, green light flashed for a minute like it...

Now,tv on?.Tv "LAMP" LED light indication flashes or stay on?How long the Lamp been inside this tv,been inside like 1 1/2 or 2 years and tv been on each day like 4 or 5 hours a day in used.The lamp life are over.Should replace another lamp.

Dec 10, 2010 | Mitsubishi WD-57732 Projection Television

2 Answers

Last night the tv was fine i turned it on this

Unplug 20 minutes. Make sure there is adequate ventilation around the set.

Try with the original manufacturer remote to view setup menu.

Power outages come at night. This sometimes resets the TV and other devices. .

Mar 25, 2010 | Insignia 42" LCD Flat-Panel HDTV

1 Answer

Mitsubishi WD-52525 was working fine and now it will not turn on

This is just a shot - but it worked with my Sony (same problem).
Pressed remote power on button AND held Power button on TV on at the same time.

Set clicked 4 or 5 times and then came on....

Other, most have a (VERY small) reset switch on the rear - near where the power cord enters the TV... Use a flashlight and a mirror to locate it on your set....

Nov 26, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

ESA 42' plasma turned off on it's own and won't turn back on.

I think, when a power supply's time is up, it's up now. There is not usually any advance warning,(besides your warranty has expired of course). If you are feeling un-normal heat from the TV, that is a sign the power board just fried out. They always get very hot, from the microchips cooking themselves until there is nothing left to need power. Plan on paying a TV tech to replace your power board.

Nov 13, 2008 | Televison & Video

1 Answer

Hitachi 60UX58B will not turn on

I think there could have been a power surge... ask the repairman if the power supply is blown. :)

Jun 18, 2008 | Hitachi 60UX58B 60" Rear Projection...

2 Answers

Power problem on a RCA big screen TV

Even with the tv turned off, the power supply is still active.It's supplying voltages to the microcontroler, that's why each time you press the power button on remote the tv respond by turning on. First check the power cord to be well connected in the power-bar and if it's ok...well the power supply is defective and due to the high risk of electric shock i suggest you to call a technicien.
P.S. I respond here because I don't know why our chat session got disconected.

Feb 01, 2008 | Televison & Video