Motorola H12 connection to more than 1 phone?

Motorola Default unchangeable pin is 0000

https://motorola-global-eng.custhelp.com/app/answers/detail/a_id/12462/~/pairing-pin-code

1)Turn on the bluetooth headset.
2) Turn on bluetooth on your phone. It starts looking for bluetooth devices in the vicinity. Your headset will be detected as "bluetooth headset" or "Motorola H12 Headset".
3)Once its located then select it and follow the onscreen instructions like choosing a passkey etc., to complete the pairing process.

default is 0000 for the H12

the wesites are not much help for this one are they? I just figured this out a few minutes ago...I have the same headset.

1.) press your home page button at the bottom of the iphone
2.) touch the setting icon (gears)
3.) touch the general settings icon when it opens up
4.) touch the bluetooth tab (middle of screen)
5.) turn on your H12 and make sure the blue light is solid and place next to your iphone
6.) turn on the bluetooth...devices will come up...your H12 will be listed
7.) enable connection...badda bing! your done!

My H12 manual has the passcode as 4 zero's for most phones.

have you tried charging ur h12 headset until its full? if so then the internal battery inside the headset is probably getting old or dying out, suggest you bring it to ur nearest local Motorola store for details on repairing the headset.

I just kepted trying the 0000 and it finally worked. Thanks for trying to help me. Debra

I just figured it out myself!!

here is how:
1.) press your home screen button at the bottom of your iphone
2.) open settings
3.) go into your general settings (same gear picture as home page)
4.) touch to open bluetooth
5.) turn on your H12 headset and place close to your iphone
6.) turn on bluethooth on iphone and it will automatically find the headset
7.) touch the motorola H12 button and it will enable the connection

Hi,

Had the same problem myself try 0000 it seems to be the standard motorola solution for H12 bluetooth headsets. good luck

-put the headset in the covered charger (not plugged in)
-hold down all 3 buttons for at least 10 sec
-leave headset in charger (unplugged) and enter in 0000 when prompted for pin.