HP 2530p EliteBook - touchpad stopped working. Scrolling works except touch scrolling on right side of pad) and right button, but that's all. Wireless mouse works fine.

The driver software is Synaptics TouchPad Driver (International) which you can get from HP's support site.
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=3740643&swLangOid=8&swEnvOid=4054

you might have to reset it
Most modern laptops with touchpads offer vertical scrolling, horizontal scrolling or both. These features are located along the right-hand and bottom edges of the touchpad, respectively, and are activated when you swipe your finger along the touchpad edge. Scrolling functionality is nearly always enabled by default, but some users find the feature an annoyance and elect to turn it off. In most cases you can simply turn the feature back on using the Windows Control Panel.

Click the Windows Start button, select "Settings," and then click "Control Panel." Double-click the icon labeled "Mouse." Select the Touchpad properties tab. The labeling of this tab varies, depending on your computer manufacturer, operating system version and the device drivers installed on your machine. Common labels include "Touch Pad," "Device Settings" and "Dell Touchpad." If you do not see this option, you may not be able to turn on scrolling for your laptop; skip the remaining steps and refer to the "Warnings" section below. Click the "Settings" button within the Touchpad Properties menu and look for the section labeled "Scrolling Settings" or similar. Enable scrolling within this section and define other scroll settings, such as scroll zone width and scrolling speed. Click "OK" to confirm your changes, and then close the Control Panel windows opened in the previous steps. The scrollbar on your laptop is now enabled.
Scroll Is Not Working With Windows 7 b> Certain computer touchpads have a vertical section on the pad itself that is used to scroll through the page or program window that you are currently viewing on your computer. If the scroll functionality suddenly stops working but the actual touchpad is still fine, this means that the part of the software for the device that controls the ability to use the scroll has been disabled. You can enable it again in the Control Panel.
Click "Start." Click "Control Panel." Click "Mouse." Select the "Enable Scroll" option (or whatever similarly named option is available on your specific model of laptop computer). Click "Apply." The scroll bar on your touchpad will now work again.

b>

Check that the correct driver is loaded for the touch pad. Also check the Mouse settings in Control Panel.

well remove all usb devices
fail now>
then go to HP.com get your synaptics driver,
this fixes it. NO OS stated by you. so no links possible
if not that the pad is bad.

Click the Windows Start button, select "Settings," and then click "Control Panel."

Step 2 Double-click the icon labeled "Mouse."

Step 3 Select the Touchpad properties tab. The labeling of this tab varies, depending on your computer manufacturer, operating system version and the device drivers installed on your machine. Common labels include "Touch Pad," "Device Settings" and "Dell Touchpad." If you do not see this option, you may not be able to turn on scrolling for your laptop; skip the remaining steps and refer to the "Warnings" section below.

Step 4 Click the "Settings" button within the Touchpad Properties menu and look for the section labeled "Scrolling Settings" or similar. Enable scrolling within this section and define other scroll settings, such as scroll zone width and scrolling speed.

Step 5 Click "OK" to confirm your changes, and then close the Control Panel windows opened in the previous steps. The scrollbar on your laptop is now enabled.

Hi,

The notebook model you have is shipped with the Synaptics touchpad driver. Please follow the below steps to enable scrolling features:

1. Open Control panel -> click on Mouse . It will display Mouse Properties dialog box.
2. Under Mouse properties Window click the Device Settings tab
3. Click on Device Settings -> Settings button. This will display the Properties for Synaptics TouchPad on PS/2 port.

4. Follow the steps below to enable the Tapping Feature :

Highlight Tapping in the Left hand side , and Check the Enable tapping in the Right hand box .

5. Follow the steps below to enable Scroll feature:

Highlight Virtual Scrolling in the Left hand side and Check both the boxes in the right hand side.
6. Click OK .
Alternatively you can anble scrolling by reinstalling touchpad driver.

Touchpad driver for Vista:

ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39534.exe

Touchpad driver for Windows 7:

ftp://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe

There are two reasons for this, wrong or missing touchpad driver, or scrolling is disabled. First go to HP... http://welcome.hp.com/country/us/en/support.html

put in your exact model number and click on the drivers link, download the touchpad driver and install, scrolling is automatically enabled. When you download a new driver it will over-write the present one and all it's settings.

Use alps one as well as check weather your touch pad is lock or not

If you have the drivers for the touchpad installed then you should be able to run your finger up or down the right hand side of the touch pad and have it scroll the page you are one.

If it doesn't work then you may need to either reinstall the drivers or find the program that handles the touch pad settings (usually found in program files) and turn the scrolling feature back on.

Hope that helps :)

SCROLL PAD SOLUTION THAT WORKED FOR ME!!!

Well what I did was I went to CONTROL PANEL, went to the HARDWARE AND DEVICES, went to the DEVICE MANAGER which has a list of Devices. I found the MOUSE DEVICE on the list, right clicked it went to PROPERTIES go to the DRIVER TAB, and then click on ROLL BACK DRIVER. Restart your computer. and then repeat everything again. CONTROL PANEL>DEVICES>MOUSE>PROPERTIES>DRIVER TAB when u get back to the driver tab of your mouse device. click on UPDATE DRIVER. It will then find the driver automatically reinstall it for you and then restart your computer. HOPE this fixes your scroll pad. It did for me.