My tv shows 058-0.06 271 A1 on top and 07 2641 on bottom what does this mean and how can i fix it?

AL_1
Appears with hood closedif the top limit switch (FC_UP) cuts in.

Appears with hood closed, if:

• the bottom limit switch (S3) returns to the rest position_;
• the top limit switch (S5) cuts in;
• "S3" does not cut in.

Dado

Leaks from top of box or around the input shaft? Fixing leaks from a steering box usually means complete rebuild. Better just to replace whole unit if it has more than 100k miles or more. Note: a bad steering stabilizer can cause box to go bad due to shock loads.

U have the tv original remote wright?This problems likely parts of Close Caption problems.Look for a button that said CC on the remote press it make sure all like CC1,2,3.. to off should solved this problems.Or tries go into the main tv Menu looking for Close Captioning functions turn off to all CC1...and Text1... all to off.Will fixed this problems.

This problems ur tv have can't not be fix by adjustment.The tv have a problems known as convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadow pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors too.These parts on the tv convergence board,must be replaced to repair the tv convergence board to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

The cover is not shut all the way or the magnet is not making the connection between the cover and the chassis. A1 is a microcode checksum error. don't know what that means.

This sounds like low screen voltage(A1)try adjusting the a1 voltage bottom control on flyback transformer if you have a voltmeter, voltage on crt base possible market screen or A1 shoud be beteen 350/500 volts when making adjustment remember to take into account current taken by meter If voaltage will not adjust flyback transformer will have to replaced

try shopjimmy.com

i have a 52 in rca tv and i turned it on and now there is a blue and yellow stripe at the top and bottom of the tv. and the people have a blue shaddow around them ? how can i fix this?????

set field number 3 = to sum of first 2

example
A1 = 5
B1 = 6
C1 = A1+B1 which will make C1 show 11
type in C1 = then move cursor (arrow key) over to A1 then type + then move cursor to B1 then hit enter - formula showing in C1 on top should show
=A1+B1 and valud in cell should show 11

Hope you have fixed this problem by now, if that tv is unserviced, I mean if nobody has ever opened it, it could be a problem with the positioning of your tv, just tilt the tv in different positions and find out the position in which it will show the right fit. If it is serviced, especially yoke is changed, this is rare, it could be because the position of yoke is not aligned properly.