What do I do to get my remote from saying remote 2

There are manual controls for the channel change on the TV just look.

You should have its original remote control to select its inputs. To buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites Check this site too.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

SOUNDS LIKE YOU HAVE ALARM IN SILENT MODE

If you need further help, I’m available over the phone at https://www.6ya.com/expert/stephen_fa62cb6d50fe05e8

I would be very interested to know if you found a fix for this problem, I have exactly the same model with exaclty the same problem.

i have a 2007 impala ss and my remote does not work changed batterys and tryed reprogramming wat should i do?

first wat are u trying to do,,,,,,in mind....wat way,,,,,to do wat....try going to get thing that can remote w/remote to do......reverse the plan of mind,,,,

Hi. You will need to add the TV to your Harmony account in the software. If you do not have the software, you can download it at http://logitech.com/myharmony.

1. Launch the software and log in to your account.
2. Click 'Add Decice.'
3. Enter in the TV's model number, etc.
4. Click 'Update Remote.'

Your remote shoule now work on the TV.

Hey hi u doing I c u need help but wish I could help but u might be able to help me out. I need to know wat colors go to wat in a car u know plz help me out

well im going 2 say that if u got water on it your screwed but i know how u fill so wat u need 2 do get it dry as fast as possible first take it apart then clean it with somthing soft since it is very delacate on the inside and put it back to gather if it doesnt work its done i hope i helped u

I own a One-for-All universal remote (model URC-4220) which works with Haier TVs. The remote comes with a booklet with a list of setup codes.
In order to determine if you can change things manually, you would need to push any buttons on the TV, and see if VIDEO 1 or VIDEO 2 appears on the screen. If nothing like this happens, then you need to buy a universal remote.
I purchased my remote at Walmart, for less than 10 dollars.