I would like to know if it is possible to install a systemax pc camera,that comes with the computer,to a different computer (Vaio) without the disc?

You will need a windows installation disc. Then you will need to put that in the computer and boot to the installation disc. From there you will want to perform a repair installation and that should fix your problem and your data will still be on the computer. Be careful and make sure not to perform a fresh install as you will lose all your data.
Thank you,
Lee

Hi cadijah495,

You can use the VAIO Camera Capture Utility Software installed in the Computer to capture images and record Videos. You can access the VAIO Camera Capture Utility from "Start", "All Programs", VAIO Camera Utility and clicking the VAIO Camera Capture Utility.

If the Application is not available in your Computer, you can re-install it from the below link.

http://s02.download.sony.com/US/pc/SOOOTH-36900000-US.EXE

Please open the above link in a new web browser window to download the file. Then, please save the file on the Desktop. After that, please double click on the downloaded file to begin the installation. After installing the file, please restart the Computer for the settings to take the effect.

Hope this helps.

Please let me know if you have any further questions or require any further assistance.

Thanks for using FixYa.

Download the drivers to the computer you are using. Then burn them to a CD disk.

When you go to download the drivers, Note where they are going First. Write the name of the driver file down. Then look to see where it is going to be downloaded to.

See if it is going to your My Documents folder, (Documents in Vista)
(Start > My Documents for WinXP)
It may go to a sub-folder within the My Documents folder. Downloads.
Double-click on Downloads to see.

It may go directly to your desktop screen.
Have a fresh CD disk in the optical drive. (CD/DVD drive)
Right-click on the file name when you see it.
Left-click on Copy.

Then click on Copy to CD, or the name of your optical drive.

Windows running on the Systemax computer, put the CD with the drivers in it's optical drive.
Go to My Computer.
(Start > My Computer)
Left-click on My Computer.
Now double-click on the optical drive name (Letter. Example; (D:) drive)
Then double-click on the name of the Ethernet driver file.

The Installation Wizard should come up, and lead you through installing.
(Essentially click on Next, Next, and Finish)

Restart your Systemax computer.
Go through the process again to install the Audio (Sound) file.

This is Systemax Support > Downloads,

http://www.supportforyourpc.com/tools/downloads4.asp

All XP install disks of the exact same type as yours will work for a Repair, Just borrow one from a friend.

Installing a fresh operating system requires a very long process and some technical know-how. I suggest you chat with me as premium assistance using another computer other than the one you are about to renew.

use any cd burning software and copy the cds dont copy the contents only, use copy cd function for recreating the cds

Did your computer come with xp already installed?
If so just boot to d: drive. that is the drive that has xp setup on it.
If not do you have the COA number on either the back or side of the computer?
If you do you can go to microsoft.com and download xp from there.

Call Tiger They sell the Systemax- buy the way real good computer. If they wont deal let me know I sell Systemax. [email protected]

Install your sound drivers. If the are already installed you need to uninstall them and then install them again. After that you need to update them.

Systemax Restore procedure

Systemax Support Site