Says something about class installer will not install

For CLASS line functionality on the ONS/CLASS Line card, you must install a DSP module (single) on the BCC III in the same SX-200 ELx cabinet.

Are you trying to access a program that you downloaded?
Are you trying to program something?

This is an error that is encountered when a program is started but the system cannot find the main class (The first step to starting the program which controls the whole flow of the program)

If it is something you downloaded from a rookie developer, or something you programmed yourself take a look at your main function, it is probably declared improperly. Google the specific language you are using to see how it is supposed to be declared.

If it is a mainstream something you are trying to install and run something somewhere corrupted. Try to re-download and reinstall. If that doesn't work it is possible something in your registry is corrupted... unlikely, but possible.

hello there uninstall the skype and install new version the of skype, or upgrade your version.

Hi

Try to uninstall bulb and re-install it. Try another bulb if possible.

Hope this helps

Your program did not install properly. Based on the error message "Resize32.ocx" or something it needs to run did not install properly. Uninstall through control panel-add/remove programs and reinstall.

Hi, Well you havent described the problem completely and was it like a fresh installation or something like that. Here I am assuming that it waz a fresh installation, check for the jumper and the BIOS settings. Make sure that the dvd drive that you are using is compatible with Laptop you are using.
If it wasnt a fresh installtion maybe something might have gone wrong with your registry. Follow these steps to fix it.. 1. Start the Run Command Prompt
2. Type in "regedit" without the parrenthesis then click ok
3. Go to HKEY_LOCAL_MACHINE
4. Then SYSTEM
5. Then CURRENT CONTROL SET
6. Then CONTROL
7. Then CLASS
8. Then find {4D36E965-E325-11CE-BFC1-08002BE10318}
9. The whole thing looks like this:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
10. Then delete the upper and lower filters....
11. Quit editor
12. RESTART YOUR COMPUTER and thats it..!!!

I have a Coachman "Road Trec" class C and I installed my scissor jacks near the frame member for the front just to the rear of the bumper. I installed a length of angle iron from the left frame rail to the right frame rail then installed the jacks on the angle iron as close to the frame a possible.
On the rear I cut a piece of 3 " angle iron and bolted it to the outside of the frame then mounted the jack on the angle iron for each side.

Are you running OSX 10.4? Not supported yet...

Mac OS 9.2, Mac OS 10.2, Mac OS 10.3

Elsewise call MacAlly support or Apple.

something is draining the battery just not sure what,

Do you set the envirorment variables(Java_home), if it is ,check the path is correct or not.
Delete the ClassPath from environment variables, and set class path in command prompt by typing class PATH=%PATH%;path to java(eg:class PATH=%PATH%;C:\Programfiles\jdk1.6\bin) .