Colors flashing no picture

How-to Fix KDS K917s Model 900P LCD Computer Monitor ...

? 9:59
https://www.youtube.com/watch?v=rkYJS2KhnTc
Jul 5, 2010 - Uploaded by X2YeZCAMCNC
How-to Fix KDS K917s Model 900P LCD Computer MonitorRepair Screen .... This screen has the exact ...

Amazon.com: Ac Dc Adapter Charger for Xerox Model 900 ...

www.amazon.com > ... > Monitors

Amazon.com, Inc.... Model 900 Xl592ds Xg-90d Xl370b Xl-370b Lcd Monitor,xerox Xg-70d 17" Lcd ...Power Supply FOR Xerox model 900 XL592DS XG-90D XG-70D XG-71D ...

Not sure if the 71 is the same as the 70D but here's how to take the 70D apart.

Can you adjust brightness (button on monitor)?

For this project, we will be making a basic sunburst design on a t-shirt.

1. First, wash the -shirt in order to remove any possible dirt and prepare it for dye absorption. Tie-dying is best done on damp fabric.
2. Cover our work area with newspaper to protect it from any spills, and assemble all your tools.
3. Wear rubber gloves to prepare the dye. Carefully follow the manufacturer's instructions provided on the package.
4. Our particular fabric dye, Venus, for example, calls for the powder to be dissolved in boiling water to get the best, fastest results possible. So fill the large container with lukewarm water, bring to boil, and pour in the dye, starting with the lightest color if you are using more than one color.
5. While the water is coming on a boil, lay the t-shirt flat on your work area. Grab the center of the t-shirt with your thumb and index finger, and lift it up. Run your other hand down the cloth, twisting the fabric as you gather it together tightly.
6. Wrap one rubber band around the gathered t-shirt, right below the spot where you lifted. Then, wrap a few more rubber bands, about one to two inches apart from each other. Feel free to make up your own spacing.
7. Once you're satisfied with the rubber band placement, immerse the entire t-shirt in the first color dye. Boil the t-shirt for 10 minutes , stirring constantly. Then, stir 4 level tablespoons of salt into the mixture for each gallon of water used. Boil for another 20 minutes, stirring constantly.
8. Remove the t-shirt and rinse in cold running water. Wring out the garment until water runs almost clear.
9. For designs requiring more than one color, repeat steps 3 to 8, using colors in order from lightest to darkest.
10. When you have finished dying the garment, remove rubber bands and lay t-shirt flat on your workspace. Place a towel over the still-damp garment, and iron it flat.

is this a crt or lcd monitor, reseat the memory in the pc

try swapping a known good monitor to make sure its the monitor?
http://www.aa1consulting.com

try setting your menu;s to adjust the picture settings

Sorry time for a new monitor you might open it up and look at the capacitors and see if any need to be replaced the bad ones will be domed on top normal is completely flat

I have a tie dye of rainbow colors on the whole screen. Is the screen shot?

I have a flashing light.I am going to replace the PS and I will repost