Replacement battery for Philippe Starck Fossil watch

Fossil Contact Information Main support number 1-800-842-8621
Email support [email protected]

hope this helps

You can get instructions for your watch from the Fossil web site.

Go to "fossil.com", go to the bottom of the page and you will see a
menu, click on "customer care", and then look under "Product Info" on
the left and you will see "watch instructions"

Click on this and a list of diagrams and watch descriptions will appear. Put
your cursor over any of the descriptions and a diagram of the watch face will
appear. Search the list until yours appears and download.

Hi. I´ve got a ph-1030 and it works with a `RENATA 350`. I couldn`t d this reference so I bought a similar one.I got the `SR1130W` . This battery works but you have to place an small tape on the back (negative pole), to insolate the battery. You have to do it because this battery is a litle bite smaller than the renata 350. If you need anything else email to [email protected]

At a watch store or Jewelry counter in most department stores.

Follow this link: http://www.fossil.com/webapp/wcs/stores/servlet/Static____Instructions_custCareNav Scroll down and find Philippe Stark watches, then click on appropriate watch. Rate me, plz.

Type in your browser FOSSIL WATCHES.
You will find numerous sites. Go thru them till you find what you're looking for.

hold the left, bottom button (marked ....) for a few seconds....then press the top right button (marked with 1 dot) to change between the hour, minute, date etc. use the bottom right button to advance the flashing number, and when finished setting time and date, use the bottom left button to stop the numbers flashing and return the watch to normal. hope this helps, this is also how to change the date for the other question asker (works on 2 other starck/fossil watches i have and i assume the controls are the same).

hold the left, bottom button (marked ....) for a few seconds....then press the top right button (marked with 1 dot) to change between the hour, minute, date etc. use the bottom right button to advance the flashing number, and when finished setting time and date, use the bottom left button to stop the numbers flashing and return the watch to normal. hope this helps,