New Remote I have purchased a new remote for a Daenyx tv but can't program it, cause theres no codes listed for this type tv. It has been the same for the other two that I've purchase and returned. Could you help? Thanks.

I don't know if an RCA remote will work with a Daenyx tv, but I do know that a Harmony 600 will. It costs about $80.00 and codes are provided by the Harmony website during programming. The site just needs the product name and model number.

The Harmony 600 will work with a Daenyx tv. It costs about $80.00 and codes are provided by the Harmony website during programming. The site just needs the product name and model number.

Teresa;

The Harmony 600 will work with the Daenyx DN-193. It costs about $80.00 and codes are provided by the Harmony website during programming. The site just needs the product name and model number.

The Harmony 600 will work with a Daenyx tv. It costs about $80.00 and codes are provided by the Harmony website during programming. The site just needs the product name and model number. I don't think WalMart would carry it but a good electronic products shop will.

The Harmony 600 will work with a Daenyx tv. It costs about $80.00 and codes are provided by the Harmony website during programming. The site just needs the product name and model number.

The Harmony 600 will work with a Daenyx tv. It costs about $80.00 Cdn and codes are provided by the Harmony website during programming. The site just needs the product name and model number.

Programming Your Universal Remote.

The remote may already be set up to operate your brand of TV, VCR, or Cable Box. It is pre-programmed with following codes:

• TV-000
• VCR-000
• Cable Box-000
• AUX is programmed with VCR code 037

For brands that require programming, there are two ways to program: Using Code Lists or Code Search. Use Code Search if the code lists are not available or if the codes from the lists do not operate a device.

Programming a Device using Code Search:

1. Manually turn ON your device (TV, VCR, Cable Box)
2. Press and "HOLD" CODE SEARCH
3. Press and release the device button you want to set up (TV, VCR, Cable Box) However, if you are using AUX for a device, press and release AUX first and then the device button for the type of device to be programmed (TV, VCR, or Cable). The selected device button will flash once.
4. Release CODE SEARCH.
5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100 times at a rate of once per second).
6. Once the device turns off, press and release ENTER.
7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6.

Programming a device using the Code Lists:

1. Find codes for each device and brand below.
2. Press and "HOLD" CODE SEARCH.
3. Press and release the TV, VCR or Cable button you want to set up. If programming AUX for a device, press and release AUX first and then the device to be programmed (TV, VCR or Cable). When the selected device button flashes proceed to the next step.
4. Enter the three digit code from the TV, VCR or Cable Box code lists.
   
   
5. Release CODE SEARCH.
6. With the device on, press another button, for example CHANNEL UP. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-5 using another code number from the lists.

For more info, copy and paste this link in your address bar so you can get codes for you remote:

http://www.thompsontv.com/rcarc.html

need a code for a Toshiba tv to program into star choice remote

My Daenyx DN-191 D TV remote stopped worked after a while. I didnt get one universal remote that works with this piece of junk. I called their customer service at 1-877-329-8351. They said the remote will be $30 + $7 (shipping) + tax. Your best bet will be to buy a replacement remote or better toss this junk off the window.

Here try this link

REMOTE

pls dont forget to rate as fixya if helpful. Thanks!!