Have lost handbook need factory settings for bluetooth

If you have changed the pin from factory settings, then you need to reset to factory settings. Usually if you can factory reset it, the pin will be 0000 or 1234.

activata butooth s3310i

The PUk (phone unlock code) is a pin number to allow certain activities. Unless you have set it to something different the PUK number will be the manufacturers factory set default - these vary from one brand to another. It should be quoted in the user handbook for your phone.

ALL YOU CAN DO IS TO RESET THE ROUTER TO FACTORY SETTINGS
You may reset router to factory setting from the reset button on the back side of the router. Use a paper pin to press the button for few seconds, the lights on the front would blink and the router would restart with factory setting. Please not that ALL SETTING WOULD BE LOST...AND YOU WOULD HAVE TO MAKE CONFIGURATIONS AND SETTING ALL OVER AGAIN


HOPE IT HELPS...Let me know if you need any further assistance
CreativeTECH

Hi,
To turn on Bluetooth and connect a Bluetooth hands-free headset or car kit:

1. On the Home screen, press the Menu key.
2. Touch Settings
3. Touch Wireless & networks
4. Touch Bluetooth to turn it On
5. Touch Bluetooth settings
6. Touch Scan for devices (make sure your headset is in pairing mode).
7. Your phone scans for available Bluetooth devices
8. Touch the Bluetooth device to select it
9. Type the PIN if needed (PIN is usually 0000, or 1234)
10. Touch the device name again to connect to it.

Hi Friend,

Please follow the below steps to activate the bluetooth in your Mobile Phone

Step 1: From the Home Page, Open the Application List and select the Settings------->Wireless Control

Step 2: Select Bluetooth to turn on the bluetooth wireless features

To connect the Other bluetooth devices and get paired with your mobile

Step 1: From Home Page,Open the Application List and Select Settings------>Wireless Control------->Bluetooth Settings------->Scan for Devices.

Step 2:It will display the List of available bluetooth devices in the range

Step 3:Select any one device and try to connect it

Step 4:It will ask for PIN Number type 1234 and Click on ok

Step 5:It will getting paired you will be able to transfer the files

If you have any Clarification please feel free to reply

Regards,
Ayyasam

Try default PIN of 136852 - good luck!!!

the pin is 0000

I recently lost the instructions to one of my bluetooth also. What I did was this.. I went to the bluetooth link settings and turned the POWER on under SETUP. I then turned on my bluetooth and pressed the button (holding it down) until it was a solid light. I then went back to the bluetooth settings and clicked on FIND ME. If the bluetooth is in the correct mode your phone will discover it and will add it to your cell phone, it will also change the solid light to flashing. Flashing says it is on/activated. I hope this has been helpful.

no there is not any preset code for bluetooth u can just enter any code and must verify with another