I have this same problem on our Kenmore front load dryer. We get burn (brown) marks on our clothing. What is causing this?I have this same problem on our Kenmore front load dryer. We get burn (brown) marks on our clothing. What is causing this?
AnonymousMar 29, 2014
Turns on, flame lights up for 10 seconds, then flame goes out. What's wrong?Turns on, flame lights up for 10 seconds, then flame goes out. What's wrong?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
When the dryer makes sequeaking sound, usually it is the belt that is either worn out or has gone bad, however it is also recommended that the idler pulley be checked and replaced if that is also bad along with the belt. You can check this video to replace the belt:
leave door open and press the rubber botton inside, \ I just hooked up mine and it did same thing, i pushed botton light went out, so this told me the door wasnt closing correctly, you have to push hard on door first couple times. hope this helps you.
dave
the felt seal part number 697694 could be worn,if the drum sags down from the felt wearing down it forms a gap and the clothing can even get stuck in gap,some dryers have glides that wear down and some ride on a back bearing,but the problem usually is from a part wearing down and a gap forms from it and it damages the clothing,hope this helps
repl/ thermistor, also remember that these dryer have smart sensor drying,, there are 2 metal strips inside use rubbing alcohol and clean this will fix your probablem
I have this same problem on our Kenmore front load dryer. We get burn (brown) marks on our clothing. What is causing this?
Turns on, flame lights up for 10 seconds, then flame goes out. What's wrong?
×