Kingston DT1000 pendrive was not detected in computer

send it to the service center of kingston
they wil give a new pendrive
search the service center online........

try to open in another computer see if it opens there n get ur data first coming to the unknown device issue, firstly insert ur pendrive to usb slot firmly then refresh your comp for about 5 times wait till the drivers are installed open "my computer" n see if the pendrive icon is displayed if its displayed double click n start using . If the above procedure does not work first time do repeat it ur pendrive will work for sure

normaly your pendrive not formated so cmd (command prompt) use.

Run - cmd (type) than enter

format (pendrive colon) than enter

continue process which computer show
your pendrive is formated.

BEST SOLUTION FOR UNREADABLE DISK IS TO FORMAT IT USING THIS WONDERFUL TOOL, I GOT SOLVED MY PROBLEM, TRY IT .


http://hddguru.com/content/en/software/2006.04.12-HDD-Low-Level-Format-Tool/

When i copy any data to my 32 Gb Kingston pen drive whether any audio or video file or any software, the data get corrupted or may be deleted. some trimes it happen that some of the AV files are working. Why this happened that the data are deleted. I have lost many of my files due to this.It cannot be fomatted also. Please sort my this problem. Thanx

hi there.
this is what i have just found on the internet it might help you out but not sure.
After plugging in the device. Go to device manager (In run type "devmgmt.msc") In Device manager go to "Universal serial bus controllers" It should list the storage devices that you have connected to your PC. Right click and then click "Uninstall. Remove the USB drive and restart your system.
Try connecting the device again, I think this should solve the problem.
for windows xp
first you need to go to Device Manager by double-clicking on the System icon in Control Panel, choosing the Hardware tab, and clicking Device Manager.
go to divice manager
usb hub controler it will be at last of the list then
right click on usb hub controler open it go to usb root hub right click & go to properties
then go to device and click ok
do it 4 to 5 time it will work 100%
i have tried it and it worked
Best of luck :)
hi do one thing go to my computer right device manager ther u to o universal serial bus right click on tht option go to update driver select yes this time only give automatic k . before doing this step plz insert mother board driver cd after tht u do all this procedure thn c ur pendriv vl be dedected k
if none of the above works try this link out.
Kingston DT 1000 pendrive was not detected in computer Google Search

2) How to put Slax on CD:
http://www.fixya.com/support/r3879348-slax_guide_survival_live_linux_usb_flash

Download this driver from link below http://www.technical-assistance.co.uk/drivers/nusb33e.exe Please rate me FixYa if your has been solved by this

virus might be caused for such problem, scan drive with a updated virus cleaner.

There are utilities available for most PenDrive products. Go to this link: http://www.pendrive.com/downloads/
i hope this will help you.