I INSTALLED DAISY WHEEL (PROPERLY) AND DID CODE + RESET ON TYPEWRITER TO RESET AND WHEN I TYPE THE LETTERS AND NUMBERS ARE NOT THE SAME AS WHAT I TYPE. I HAVE A BROTHER GX-6750 ELECTRONIC CORRECTIONAL..PLEASE HELP. RUSH JOB PENDING..
Press the Code button and the Q/Reset button at the same time and the wheel will spin and go back to the correct place.
Check to see if your pitch setting is in PS if so try 10 or 12.
DickyO
Same problem here, but settings were all correct and "code-reset" would only re-scramble the wheel to another crazy configuration of gibberish.
Turned out to be the plastic case was a little warped from rough handling. After straightening it out, the carriage was able to grip the daisy wheel correctly and it worked just fine.
2,434 views
Usually answered in minutes!
Daisy wheel typing random letters and symbols brother GX 100
5/7/09: I'm having the same problem on the model SX-4000. I was typing away and all of a sudden the letters showing up on the paper did not match what I was typing. I called the technical support number and they could not figure out the problem.
×