Evreything worked fine turned off car 5 mins later turned it back on and subs stopped working. Can't get them to turn back on. I unpluged everything from the amp and let it sit over night to reset protect mode and still dosen't work.
Hook up the amp and check the output with a test light or multimeter
Coils in sub is damaged replace sub
If the sub isn't working, you won't get a pop. All you need is a small speaker. Don't need a sub, you just want to test the sound. I recently blew 2 subs, no smoke, no smell, no sign of being blown. Absolutely nothing from the subs.... In the past my sub locked up. You can take your sub out of the box and hook the + and - to the battery to see if you can get the sub to pop there. I believe a small box will push a sub into a deep excursion to the center of the cone. I have 2 lanzar VW12D's that just quit. I hooked a 6 x 9 up to my amp and low and behold I had sound! Try that and see what you get...
687 views
Usually answered in minutes!
No Poping noises when I plug the RCAs in. The amp powers on correctly all wiring is correct I have a second amp hooked to same source that is working. I assume I blew the channels in the amp or my speaker. I'm wondering if there is a way to reset the protection mode or if it dose it by itself. I am still hunting down a second sub to test the channels.
No Poping noises when I plug the RCAs in. The amp powers on correctly all wiring is correct I have a second amp hooked to same source that is working. I assume I blew the channels in the amp or my speaker. I'm wondering if there is a way to reset the protection mode or if it dose it by itself. I am still hunting down a second sub to test the channels.
Do you receive a popping noise when you plug back in the RCA cables? Do you still have power to your amp?
Have you checked all your fuses and all your wiring and wiring harness?
×